SYSTEM DESCRIPTION
- LIN COMMUNICATION SYSTEM DESCRIPTION The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reason, the master control ECU of the relevant system will output a DTC. Refer to the table below about the communication bus lines and connected components. HINT: Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system. In the following table "o" indicates that the function applies, and "-" indicates that it does not. DOOR BUS LINES Component Master Control LIN Communication DTC Output Function Main Body ECU (Multiplex Network Body ECU) o o Front Power Window Regulator Motor Assembly LH - - Front Power Window Regulator Motor Assembly RH - - Rear Power Window Regulator Motor Assembly LH - - Rear Power Window Regulator Motor Assembly RH - - Multiplex Network Master Switch Assembly - - Sliding Roof ECU (Sliding Roof Drive Gear Assembly) - - CERTIFICATION BUS LINES Component Master Control LIN Communication DTC Output Function Certification ECU (Smart Key ECU Assembly) o o Power Management Control ECU - o Steering Lock Actuator assembly (Steering Lock ECU) - - ID Code Box (Immobilizer Code ECU) - - AIR CONDITIONING BUS LINES Component Master Control LIN Communication DTC Output Function Air Conditioning Amplifier Assembly o - Air Conditioning Control Assembly - - LIGHTING BUS LINES Component Master Control LIN Communication DTC Output Function AFS ECU (Headlight Swivel ECU Assembly) o - Inner Rear View Mirror assembly - - Headlight swivel motor LH - - Headlight swivel motor RH - - Headlight leveling motor LH - - Headlight leveling motor RH - - WINDSHIELD WIPER BUS LINES Component Master Control LIN Communication DTC Output Function Windshield Wiper Switch Assembly o - Rain Sensor