Ignition: Removal & Installation Lexus RX II рестайлинг

INSTALLATION

1. INSTALL VVT SENSOR (for Bank 1) Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 1). Install the VVT sensor (Bank 1) with the bolt. Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) Connect the VVT sensor (Bank 1) connector.
2. INSTALL VVT SENSOR (for Bank 2) Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 2). Install the VVT sensor (Bank 2) with the bolt. Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) Connect the VVT sensor (Bank 2) connector. Install the heated oxygen sensor connector (Bank 2) to the wire harness bracket.
3. INSTALL AIR CLEANER CAP W/ INLET (See «INSTALLATION»(ref-282992-S11458015172008041400000) )
4. INSTALL COOL AIR INTAKE DUCT SEAL (See «INSTALLATION»(ref-282992-S11458015172008041400000) )