CUSTOMIZE PARAMETERS
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) NOTE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting. Connect the Techstream to the DLC3. Turn the engine switch on (IG). Turn the Techstream on. Enter the following menus: Customize Setting. Select the setting by referring to the table below. AIR CONDITIONER Display Default Contents Setting Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C Evaporator Control Automatic Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up. Manual/Automatic Compressor/Air Inlet DEF operation Link Function to automatically turn the A/C on when the front defroster button is pressed. Normal/Link Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Manual/Automatic Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Manual/Automatic Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and center and side defrosters automatically when auto mode is on. ON/OFF Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is on. ON/OFF Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Button Press Buzzer ON Function to sound a buzzer when a button is pressed. ON/OFF Emission Gas Sensor Shift Normal Function to change the sensitivity of the exhaust gas sensor. Much More/More/Little More/Normal/Little Less/Less/Much Less