SERVICE DATA [04/2013 - ]
| Starter assembly | Standard current: 90 A or less at 11.5 V |
|---|
| Starter magnetic switch assembly | Standard resistance 50 - C: Below 1 ohms 50 - Body: Below 1 ohms |
| Starter armature assembly | Standard resistance Commutator: Below 1 ohms Commutator - Coil core: 10 kohms or higher |
| Standard length: 3.1 mm (0.122 in.) |
| Maximum length: 3.8 mm (0.150 in.) |
| Starter commutator end frame | Standard length: 9.0 mm (0.354 in.) |
| Minimum length: 4.0 mm (0.157 in.) |
| Standard resistance Positive (+) - Negative (-): 10 kohms or higher |
| Snap ring | Maximum length: 5.0 mm (0.196 in.) |
| Starter relay | 3 - 5: 10 kohms or higher (when battery voltage not applied between terminals 1 and 2) 3 - 5: Below 1 ohms (when battery voltage applied between terminals 1 and 2) |
| Engine switch | 5 (SS1) - 6 (GND) / 1 (SS2) - 6 (GND) Specified resistance Not pushed: 10kohms or higher Pushed: Below 1 ohms |
| Standard condition: Illuminates Measurement condition Battery positive (+) --> Terminal 9 (SWIL) Battery negative (-) --> Terminal 6 (GND) |
| Ignition or starter switch assembly | LOCK Between all terminals | 10 kohms or higher |
| ACC 2 (ACC) - 4 (AM1) | Below 1 ohms |
| ON 2 (ACC) - 4 (AM1) 1 (IG1) - 4 (AM1) 5 (AM2) - 6 (IG2) |
| START 3 (ST1) - 4 (AM1) 1 (IG1) - 4 (AM1) 5 (AM2) - 6 (IG2) 5 (AM2) - 7 (ST2) |
