REMOVAL & INSTALLATION
| WARNING | Vehicles are equipped with air bag supplemental restraint system. Before attempting any repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in AIR BAG RESTRAINT SYSTEMS article. |
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
Removal
- Remove a part of the front fender liner and then a part of the front bumper cover.
- Remove the bolt, 2 nuts and 2 clips. (Scheme 11)
- Lift up the front bumper and pull the headlight assembly towards the front of the vehicle, and disconnect the engagement of the headlight assembly.
Scheme 11
Installation
- Install the headlight assembly.
- Install a part of the front bumper cover and then a part of the front fender liner.
- Inspect and adjust the optical axis of the headlight. See «HEADLIGHT AIM»(ref-154254-S30177331932003051300000) under ADJUSTMENTS.