Home ReviewsRefund
Home/Lexus/GX/Lexus GX J120 (2002-2009)/Repair manual/Windows/Engine Hood/door: Removal & Installation
Contents Wiring diagrams Section: Windows All sections

Engine Hood/door: Removal & Installation Lexus GX J120

Windows 1 illustration

REPLACEMENT

HINT

On the RH side, use the same procedures as on the LH side.

Scheme 176

Scheme 176: REPLACEMENT
Scheme 176: REPLACEMENT
  1. REMOVE HOOD SUPPORT ASSY LH Remove the bolt and hood support assy from the hood panel. HINT: While supporting the hood panel by hand, remove the hood support. Remove the bolt and hood support assy from the vehicle body.
  2. INSTALL HOOD SUPPORT ASSY LH Install the hood support assy with the 2 bolts. Torque: 17.5 N.m (180 kgf.cm, 13 ft.lbf)

More articles — Engine Hood/door