DISPOSAL
HINT
On the RH side, use the same procedures as on the LH side.
Scheme 253
- DISPOSE OF HOOD SUPPORT ASSY LH Horizontally fix the hood support assy in a vise with the piston rod pulled out. Wearing safety glasses, gradually cut a part between A and B (Scheme 253)using a metal saw to gradually release the gas. Dimension: DIMENSION SPECIFICATION a 80 mm (3.15 in.) b 20 mm (0.80 in.) NOTE: Although the gas inside the hood support assy is colorless, odorless and harmless, there is a possibility that metal debris from cutting could enter the assy. Therefore, cover it with a cloth or something similar.
