TORQUE SPECIFICATION
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Throttle body assy x Intake manifold | 14 | 143 | 10 |
| V-bank cover x Intake manifold | 7.5 | 80 | 66 in.lbf |
| Knock sensor x Cylinder block assy | 20 | 204 | 15 |
| Intake manifold x Cylinder head | 18 | 185 | 13 |
| V-bank cover bracket x Intake manifold | 7.5 | 76 | 66 in.lbf |
| Wire bracket x Intake manifold | 7.5 | 76 | 66 in.lbf |
| ECM x Body | 13 | 133 | 10 |
| Accelerator pedal rod assy x Body | 5.0 | 51 | 44 in.lbf |
ENGINE CONTROL TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Delivery pipe x Intake manifold | 21 | 214 | 16 |
| Delivery pipe No.2 x Intake manifold | 21 | 214 | 16 |
| Fuel hose x Delivery pipe | 39 | 400 | 29 |
| Vacuum switching valve assy No.1 x Intake manifold | 18 | 185 | 13 |
| Fuel pipe sub-assy No.3 x Intake manifold | 7.5 | 80 | 66 in.lbf |
| Fuel pipe sub-assy No.1 x Delivery pipe | 39 | 400 | 29 |
| Throttle body cover sub-assy x Intake manifold | 7.5 | 80 | 66 in.lbf |
| Fuel tank x Body | 40 | 408 | 30 |
| Fuel tank protector sub-assy No.1 x Body | 20 | 204 | 15 |
FUEL TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Charcoal canister x Body | 20 | 204 | 15 |
| Charcoal canister filter No. 2 x Body | 20 | 204 | 15 |
| Air pump assy x Air pump bracket | 10 | 102 | 7 |
| Air pump assy w/bracket x Cylinder block assy | 16 | 163 | 12 |
| Air switching valve assy x Air pump bracket | 16 | 163 | 12 |
| Pressure sensor x Air pump bracket | 5.0 | 51 | 44 in.lbf |
| Air switching valve assy No.2 x water by-pass joint rear | 10 | 102 | 7 |
| Air tube No.3 x Air switching valve assy No.2 | 10 | 102 | 7 |
| Air tube No.3 x Exhaust manifold | 10 | 102 | 7 |
| Air tube No.2 x Air switching valve assy No.2 | 10 | 102 | 7 |
| Air tube No.2 x Exhaust manifold | 10 | 102 | 7 |
EMISSION CONTROL TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Oil pan sub-assy No.2 x Drain plug | 39 | 398 | 29 | |
| Cylinder head cover sub-assy LH x Ventilation valve sub-assy | 27 | 275 | 20 | |
| Oil pump assy x Oil cooler assy | Bolt | 18 | 183 | 13 |
| Nut | 18 | 183 | 13 | |
| Water by-pass joint FR x Cylinder head | 18 | 185 | 13 | |
| Water by-pass pipe x Cylinder block | 18 | 185 | 13 | |
| Starter assy x Cylinder block | 39 | 400 | 29 | |
| Starter assy x Engine wire No. 2 | 9.8 | 100 | 7.2 | |
| Water by-pass joint RR x Cylinder head | 18 | 185 | 13 | |
| Knock sensor x Cylinder block | 45 | 450 | 33 | |
| Crankshaft position sensor x Oil pump assy | 6.5 | 65 | 58 in.lbf | |
| Camshaft position sensor x Cylinder head | 7.5 | 80 | 66 in.lbf | |
| Ignition coil assy x Cylinder head cover | 7.5 | 80 | 66 in.lbf | |
| Fan bracket sub-assy x Cylinder block | 12 mm head | 16 | 160 | 12 |
| 14 mm head | 32 | 326 | 24 | |
| V-ribbed belt tensioner assy x Cylinder block | Bolt | 16 | 160 | 12 |
| Nut | 16 | 160 | 12 | |
| Timing belt cover sub-assy No.2 x Cylinder block | 16 | 160 | 12 | |
| Timing chain or belt cover No.2 x Cylinder block | Bolt | 7.5 | 80 | 66 in.lbf |
| Nut | 7.5 | 80 | 66 in.lbf | |
| Timing belt cover sub-assy No.3 LH x Cylinder block | 7.5 | 80 | 66 in.lbf | |
| Pump bracket x Cylinder block | 43 | 438 | 32 | |
| Oil cooler pipe x Cylinder block | Bolt | 7.5 | 80 | 66 in.lbf |
| Nut | 7.5 | 80 | 66 in.lbf | |
| Harness bracket x Cylinder block | 8.0 | 80 | 71 in.lbf | |
| Engine mounting bracket x Cylinder block | 36 | 367 | 27 | |
| Wire harness heat insulator No.2 x Cylinder block | 17 | 175 | 13 | |
| Intake manifold assy x Cylinder head | 18 | 185 | 13 | |
| Engine mounting bracket x Frame brackets | 38 | 387 | 28 | |
| Exhaust manifold x Cylinder head | 44 | 450 | 33 | |
| Exhaust manifold heat insulator x Exhaust manifold | 7.5 | 80 | 69 in.lbf | |
| Oil level gauge guide x Cylinder head | 15 | 155 | 11 | |
| Transmission oil filler tube x Cylinder head | 12 | 122 | 9 | |
| Fan w/ fluid coupling x Fan bracket sub-assy | 29 | 296 | 21 | |
| Compressor x Cylinder block | Bolt | 47 | 475 | 34 |
| Nut | 25 | 255 | 18 | |
| Vane pump assy x Cylinder block | Bolt | 43 | 438 | 32 |
| Nut | 43 | 438 | 32 | |
| Fan shroud x Radiator assy | 5.0 | 51 | 44 in.lbf | |
| Air cleaner assy x Body | 12 | 122 | 9 | |
| V-bank cover sub-assy x Intake manifold assy | 7.5 | 80 | 66 in.lbf | |
| Hood x Body | 13 | 133 | 10 | |
| Engine rear oil seal retainer x Cylinder block | 8.0 | 82 | 71 in.lbf | |
| Oil pump assy x Cylinder block | Bolt A, B, C and E | 16 | 158 | 11 |
| Bolt D | 31 | 311 | 23 | |
| Oil strainer sub-assy x Cylinder block | 7.5 | 76 | 66 in.lbf | |
| Oil pan sub-assy x Cylinder block | Bolt A and D | 7.5 | 76 | 66 in.lbf |
| Bolt B, C and nut | 28 | 286 | 21 | |
| Oil pan baffle plate x Oil pan sub-assy | 7.5 | 76 | 66 in.lbf | |
| Oil pan sub-assy No.2 x Oil pan sub-assy | 7.5 | 76 | 66 in.lbf | |
Torque Specifications Table - Engine Mechanical (1 Of 2)
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Water pump assy x Cylinder block | Bolt | 21 | 214 | 15 |
| Stud bolt and nut | 18 | 184 | 13 | |
| Cylinder head x Cylinder block | 1st | 40 | 408 | 30 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| 3rd | Turn 90 | Turn 90 | Turn 90 | |
| Bearing cap x Cylinder head | Bolt C | 7.5 | 76 | 66 in.lbf |
| Other | 16 | 163 | 12 | |
| Timing belt plate RR x Cylinder head | 7.5 | 76 | 66 in.lbf | |
| Timing belt idler sub-assy No.2 x Cylinder block | 35 | 352 | 25 | |
| Timing belt idler sub-assy No.1 x Cylinder block | 35 | 352 | 25 | |
| Camshaft timing pulley x Camshaft | 108 | 1101 | 80 | |
| Chain tensioner assy x Oil pump assy | 26 | 270 | 19 | |
| Timing belt No.1 over x Cylinder block | 7.5 | 76 | 66 in.lbf | |
| Crankshaft damper x Crankshaft | 245 | 2498 | 181 | |
| Idler pulley sub-assy No.2 | 39 | 398 | 29 | |
| Oil filler cap housing x Cylinder head cover | 7.5 | 76 | 66 in.lbf | |
| Spark plug x Cylinder head | 17.5 | 178 | 13 | |
| Connecting rod cap x Connecting rod | 1st | 25 | 250 | 18 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Main bearing cap x Cylinder block | 1st | 27 | 275 | 20 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Cylinder head cover x Cylinder head | 6.0 | 60 | 53 in.lbf | |
| Drive plate & ring gear x Crankshaft | 1st | 49 | 500 | 36 |
| 2nd | Turn 90 | Turn 90 | Turn 90 | |
| Camshaft drive gear x Camshaft timing tube assy | 7.5 | 76 | 66 in.lbf | |
| Camshaft timing tube assy x Camshaft | 78 | 795 | 58 | |
| Screw plug x Camshaft timing tube assy | 15 | 152 | 11 | |
| Timing belt plate RR x Cylinder head | 7.5 | 76 | 66 in.lbf | |
Torque Specifications Table - Engine Mechanical (2 Of 2)
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Front exhaust pipe x Exhaust manifold | 62 | 630 | 46 | |
| Front exhaust pipe x Center exhaust pipe | Bolt | 48 | 490 | 35 |
| Nut | 62 | 630 | 46 | |
| Center exhaust pipe x Tail pipe | 48 | 490 | 35 | |
| Heated oxygen sensor x Front exhaust pipe | 44 | 450 | 33 | |
Torque Specifications Table - Exhaust
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Drain plug x Union on cylinder block | 13 | 130 | 9 | |
| Water pump x Cylinder block | Bolt | 21 | 215 | 16 |
| Stud bolt and nut | 18 | 185 | 13 | |
| Water inlet housing x Water pump | 18 | 185 | 13 | |
| Water inlet x Water inlet housing | 19 | 195 | 14 | |
| Radiator x Radiator support | 18 | 184 | 13 | |
| Fan shroud x Radiator | 5.0 | 51 | 44 in.lbf | |
| Radiator reserve tank x Fan shroud | 5.0 | 51 | 44 in.lbf | |
Torque Specifications Table - Cooling
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| No. 2 oil pan x Drain plug | 39 | 398 | 29 | |
| Oil pump x Cylinder block | 14 mm head | 31 | 311 | 23 |
| Others | 16 | 160 | 11 | |
| Oil pump body cover x Oil pump body | 10 | 105 | 7 | |
| Oil pump relief valve x Oil pump body | 49 | 500 | 36 | |
| Oil cooler x Oil filter bracket | 69 | 700 | 51 | |
Torque Specifications Table - Lubrication
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 20 | 204 | 15 |
| Ignition coil (with igniter) x Cylinder head cover | 7.5 | 76 | 66 in.lbf |
| Camshaft position sensor x LH cylinder head | 7.5 | 80 | 66 in.lbf |
| Crankshaft position sensor x Oil pump | 6.5 | 65 | 58 in.lbf |
IGNITION TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| End cover x Brush holder | 3.8 | 39 | 34 in.lbf | |
| Starter hosing x Magnetic switch | 9.3 | 95 | 82 in.lbf | |
| End cover with field frame x Magnetic switch | 9.3 | 95 | 82 in.lbf | |
| Lead wire of field coil x Terminal C | 5.9 | 60 | 52 in.lbf | |
| Wire clamp, Starter wire x Starter | 9.8 | 100 | 86 in.lbf | |
| Starter x Cylinder block | 39 | 400 | 29 | |
| Water by-pass joint RR x Cylinder head | 18 | 185 | 13 | |
| Water by-pass pipe x Water pump | 18 | 185 | 13 | |
| Intake manifold x Cylinder head | Bolt | 18 | 185 | 13 |
| Nut | 18 | 185 | 13 | |
| Bearing retainer x Drive end frame | 2.6 | 2.7 | 23 in.lbf | |
| Rectifier end frame x Drive end frame | 5.8 | 59 | 51 in.lbf | |
| Generator pulley x Rotor | 111 | 1,125 | 81 | |
| Brush holder x Rectifier holder, Voltage regulator | 1.8 | 18 | 16 in.lbf | |
| Rear end cover x Rectifier holder | 4.6 | 47 | 41 in.lbf | |
| Generator x Cylinder block | Bolt | 39 | 400 | 29 |
| Nut (M10) | 39 | 400 | 29 | |
| Nut (M8) | 16 | 158 | 11 | |
| Generator wire x Generator | 9.8 | 100 | 86 | |
| Fan shroud x Radiator | 5.0 | 51 | 44 in.lbf | |
| Fluid coupling x Engine | 29 | 296 | 21 | |
Torque Specifications Table - Starting & Charging
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Air suspension | |||
| Height control sensor link x Upper control arm assy | 5.4 | 55 | 48 in.lbf |
| Height control sensor link lock nut | 5.4 | 55 | 48 in.lbf |
| Height control compressor assy x Height control dryer assy | 6.4 | 65 | 57 in.lbf |
| Height control bracket x Frame | 29 | 300 | 21 |
| Height control compressor assy x Height control bracket | 5.9 | 60 | 52 in.lbf |
| Height control filter x Height control bracket | 6.4 | 65 | 57 in.lbf |
| Rear disc wheel hub nut | 112 | 1,140 | 83 |
| Height control reservoir assy x Body | 29 | 300 | 21 |
| Suspension control ECU x Body | 7.8 | 80 | 69 in.lbf |
| Height control sensor sub-assy x Body | 13 | 133 | 10 |
| Kinetic dynamic suspension system | |||
| Front stabilizer w/ tube cylinder assy x Frame | 135 | 1,377 | 100 |
| Front stabilizer w/ tube cylinder assy x Bleeder plug | 9.5 | 97 | 84 in.lbf |
| Front stabilizer w/ tube cylinder assy x Front stabilizer control tube No.1 | 44 | 450 | 32 |
| Front stabilizer w/ tube cylinder assy set bolt | 29 | 296 | 21 |
| Return tube sub-assy set bolt | 28 | 286 | 21 |
| Tube clamp bracket No.3 set bolt | 29 | 296 | 21 |
| Front stabilizer link assy x Frame | 130 | 1,326 | 96 |
| Front stabilizer w/ tube cylinder assy x Front stabilizer lower bracket LH | 59 | 602 | 44 |
| Front stabilizer link assy x Front stabilizer lower bracket RH | 59 | 602 | 44 |
| Front stabilizer bracket No.1 LH x Front suspension arm sub-assy lower No.1 LH | 75 | 765 | 55 |
| Front stabilizer end bracket RH x Front suspension arm sub-assy lower No. 1 RH | 75 | 765 | 55 |
| Rear stabilizer control cylinder x Frame | 130 | 1,326 | 96 |
| Rear stabilizer control cylinder x Bleeder plug | 9.5 | 97 | 84 in.lbf |
| Rear stabilizer control cylinder x Rear stabilizer control tube No.2 | 69 | 704 | 51 |
| Rear stabilizer link assy x Frame | 130 | 1,326 | 96 |
| Stabilizer bar rear x Rear axle housing | 110 | 1,122 | 81 |
| Rear stabilizer control cylinder x Rear stabilizer bracket lower | 50 | 510 | 37 |
| Rear stabilizer link assy x Rear stabilizer bracket lower | 50 | 510 | 37 |
| Front stabilizer tube protector set bolt | 29 | 296 | 21 |
| Stabilizer control valve protector set bolt | 29 | 296 | 21 |
| Front stabilizer control tube flare nut | 44 | 450 | 33 |
| Front stabilizer control tube set bolt | 29 | 296 | 21 |
| Rear stabilizer control tube flare nut | 44 | 450 | 33 |
| Rear stabilizer control tube set bolt | 29 | 296 | 21 |
| Stabilizer control w/ bracket valve assy set bolt | 29 | 296 | 21 |
| Stabilizer control w/ accumulator housing assy x Accumulator pressure sensor | 75 | 762 | 55 |
| Stabilizer control w/ accumulator housing assy x Bleeder plug | 9.5 | 97 | 84 in.lbf |
| Stabilizer control adapter sub-assy x Oil nozzle valve sub-assy | 12 | 122 | 9 |
| Stabilizer control adapter sub-assy x Stabilizer control adapter shutter valve | 14 | 140 | 10 |
| Stabilizer control valve x Stabilizer bracket sub-assy | 39 | 398 | 29 |
| Stabilizer control w/ accumulator housing assy x Stabilizer bracket sub-assy | 39 | 398 | 29 |
| Stabilizer control adapter sub-assy x Stabilizer bracket sub-assy | 39 | 398 | 29 |
| Stabilizer control accumulator valve tube sub-assy flare nut | 16 | 158 | 11 |
| Stabilizer control valve to adapter tube flare nut | 44 | 450 | 32 |
| Stabilizer control valve to adapter tube set bolt | 13 | 127 | 9 |
| Hub nut | 112 | 1,140 | 83 |
| Acceleration sensor assy set bolt | 8.0 | 82 | 71 in.lbf |
| Stabilizer control ECU set bolt | 7.8 | 80 | 69 in.lbf |
Torque Specifications Table - Suspension Control System
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Tie rod end lock nut | 88 | 897 | 65 |
FRONT SUSPENSION TORQUE SPECIFICATION
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Shock absorber x Body | 25 | 255 | 18 |
| Hub nut | 112 | 1,137 | 82 |
| Shock absorber x Rear axle housing | 98 | 1,000 | 72 |
| Upper control arm x Rear axle housing | 80 | 816 | 59 |
| Upper control arm x Frame | 80 | 816 | 59 |
| Upper control arm x Height control sensor link | 5.4 | 55 | 48 in.lbf |
| Lower control arm x Rear axle housing | 130 | 1,326 | 96 |
| Lower control arm x Frame | 130 | 1,326 | 96 |
| Lower control arm x Parking brake cable | 13 | 127 | 9 |
| Lateral control rod x Rear axle housing | 130 | 1,326 | 96 |
| Lateral control rod x Frame | 130 | 1,326 | 96 |
| Stabilizer bar x Stabilizer link | 70 | 714 | 52 |
| Stabilizer bar x Rear axle housing | 30 | 306 | 22 |
| Stabilizer link x Frame | 15 | 153 | 11 |
REAR SUSPENSION TORQUE SPECIFICATIONS TABLE
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Front Differential | |||
| Companion flange x Drive pinion | See Differential | ||
| Differential support No.2 x Differential tube | 160 | 1,630 | 118 |
| Differential support No.1 x Differential carrier | 186 | 1,900 | 137 |
| Differential support No.3 x Differetnial carrier | 108 | 1,100 | 80 |
| Differential support No.3 x Front Crossmember | 87 | 889 | 64 |
| Breather hose bracket x Differential carrier | 13 | 133 | 10 |
| Filler plug | 39 | 400 | 29 |
| Drain plug | 65 | 660 | 48 |
| Differential tube x Differential carrier | 110 | 1,120 | 81 |
| Side Bearing Retainer x Differential carrier | 50 | 510 | 37 |
| Differential case x Ring gear | 97 | 985 | 71 |
| Rear Differential | |||
| Companion flange x Drive pinion | See Differential | ||
| Differential carrier x Axle housing | 25 | 255 | 18 |
| Filler plug | 49 | 500 | 36 |
| Drain plug | 49 | 500 | 36 |
| Differential case x Ring gear | 97 | 985 | 71 |
| Bearing cap x Differential carrier | 85 | 867 | 63 |
| Adjusting nut lock x Bearing cap | 13 | 130 | 9 |
| RH differential case x LH differential case | 47 | 480 | 35 |
Torque Specifications Table - Differential
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| PROPELLER SHAFT ASSY FRONT | |||
| Propeller shaft flange yoke x Companion flange | 88 | 898 | 65 |
| PROPELLER SHAFT ASSY | |||
| Propeller shaft x Companion flange | 88 | 898 | 65 |
| FRONT AXLE HUB SUB-ASSY LH | |||
| Front axle hub assy x Lock nut | 235 | 2,396 | 173 |
| Steering knuckle x Tie rod end | 91 | 928 | 67 |
| Steering knuckle x Stabilizer link | 70 | 714 | 52 |
| Disc brake caliper x Steering knuckle | 123 | 1,254 | 91 |
| Disc brake caliper x Brake tube | 15 | 155 | 11 |
| Front brake tube bracket set bolt | 29 | 296 | 21 |
| ABS speed sensor wire harness bracket set bolt | 13 | 133 | 10 |
| ABS speed sensor set bolt | 8.3 | 85 | 73 in.lbf |
| Steering knuckle x Upper ball joint | 110 | 1,122 | 81 |
| Steering knuckle x Lower ball joint | 225 | 2,294 | 166 |
| Steering knuckle x Front axle w/ABS rotor bearing assy | 80 | 816 | 59 |
| Front wheel adjusting nut x Front axle w/ABS rotor bearing assy | 275 | 2,804 | 203 |
| Front wheel | 112 | 1,142 | 83 |
| REAR AXLE SHAFT | |||
| Axle housing x Rear axle shaft | 120 | 1,224 | 89 |
| Rear disc brake caliper x Rear axle shaft | 105 | 1,071 | 77 |
| Parking brake cable assy set bolt | 8.0 | 82 | 71 in.lbf |
| Rear axle shaft w/backing plate x Disc brake caliper | 47 | 480 | 35 |
| ABS speed sensor set nut | 8.3 | 85 | 73 in.lbf |
| Rear brake tube x Master cylinder | 15 | 155 | 11 |
| Rear wheel | 112 | 1,142 | 83 |
Torque Specifications Table - Drive Shaft, Propeller Shaft, Axle
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Transfer case lower protector x Transfer | 18 | 184 | 13 |
| Transfer assy x Transfer adaptor | 24 | 245 | 18 |
| Front bearing retainer sub-assy x Front case | 12 | 117 | 8 |
| Transfer case cover sub-assy x Front case | 18 | 184 | 13 |
| Output shaft companion flange sub-assy lock nut | 118 | 1,200 | 87 |
| Extension housing sub-assy x Case rear | 12 | 122 | 9 |
| Front case x Case rear | 28 | 285 | 21 |
| Plug No.1 x Case rear | 19 | 190 | 14 |
| CTR differential lock fork sub-assy x Transfer shift actuator assy | 24 | 245 | 18 |
| Transfer shift actuator assy x Case rear | 20 | 204 | 15 |
| Case No.1 plug (Filler plug) x Case rear | 37 | 377 | 27 |
| Case No.1 plug (Drain plug) x Case rear | 37 | 377 | 27 |
| Oil separator sub-assy x Case rear | 7.5 | 76 | 66 in.lbf |
| Oil pump body sub-assy x Case rear | 7.5 | 76 | 66 in.lbf |
| Transfer case plug x Front case | 19 | 190 | 14 |
| Indicator switch x Front case | 37 | 377 | 27 |
TRANSFER TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Bleeder plug | 11 | 112 | 8 |
| Brake booster clevis lock nut | 26 | 260 | 19 |
| Brake pedal sub-assy x Brake pedal support sub-assy | 34.3 | 350 | 25 |
| Brake pedal support sub-assy x Brake master cylinder sub-assy | 14 | 145 | 10 |
| Brake pedal support reinforcement x Reinforcement | 34.3 | 350 | 25 |
| Brake pedal support sub-assy x Brake pedal support reinforcement | 34.3 | 350 | 25 |
| Front disc brake cylinder x Steering knuckle | 123 | 1,254 | 91 |
| Flexible hose x Disc brake cylinder assy rear | 31 | 316 | 23 |
| Rear disc brake cylinder mounting x Axle hub | 105 | 1,071 | 77 |
| Rear disc brake cylinder mounting x Disc brake cylinder assy rear | 88 | 897 | 65 |
| Flexible hose x Disc brake cylinder assy rear | 31 | 316 | 23 |
| Brake booster pump x Brake booster accumulator | 57 | 585 | 42 |
| Brake booster pump x Pin | 7.8 | 80 | 69 in.lbf |
| Brake master cylinder x Brake booster pump bracket No. 1 | 7.8 | 80 | 69 in.lbf |
| Brake master cylinder x Master cylinder solenoid | 32 | 326 | 24 |
| Master cylinder solenoid x Wire harness | 2.9 | 30 | 26 in.lbf |
| Brake tube union nut | 14 (16) | 145 (158) | 10 (11) |
| Brake actuator tube union nut | 14 (15) | 143 (155) | 10 (11) |
| Brake master cylinder x Master cylinder reservoir | 1.7 | 17 | 15 in.lbf |
| Front speed sensor x Steering knuckle | 8.3 | 85 | 73 in.lbf |
| Rear speed sensor x Axle hub | 8.3 | 85 | 73 in.lbf |
| Yawrate sensor x Body | 13 | 136 | 10 |
BRAKE TORQUE SPECIFICATIONS TABLE
(): For use without SST
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Wheel nut | 112 | 1,137 | 82 |
| Parking brake lock nut | 13 | 127 | 9 |
| Parking brake lever x Body | 13 | 127 | 9 |
| Floor heat insulator x Body | 13 | 127 | 9 |
| Parking brake cable assy No.3 x Fram | 13 | 127 | 9 |
| Parking brake cable assy No.3 x Backing plate | 8.0 | 82 | 71 in.lbf |
| Disk brake caliper x Backing plate | 105 | 1,071 | 77 |
PARKING BRAKE TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Park/neutral position switch | Bolt | 13 | 130 | 9 |
| Nut | 6.9 | 70 | 61 in.lbf | |
| Transmission control bleAutomatic transmission | 12 | 122 | 9 | |
| Engine mounting insulator rear No.1 x Automatic transmission | 65 | 663 | 48 | |
| Automatic transmission x Engine | 17 mm head | 71 | 720 | 53 |
| 14 mm head | 37 | 380 | 27 | |
| Torque converter clutch x Drive plate | 48 | 490 | 35 | |
| Flywheel housing under cover x Automatic transmission | 18 | 184 | 13 | |
| Engine rear mounting member x Body | Nut | 72 | 735 | 53 |
| Bolt | 18 | 184 | 13 | |
| Transmission control cable bracket No.1 x Automatic transmission | 25 | 255 | 19 | |
| Oil cooler tube clamp | 5 | 51 | 43 in.lbf | |
| Oil cooler outlet tube No.1 x Automatic transmission | 34 | 346 | 25 | |
| Oil cooler inlet tube No. 1 x Automatic transmission | 34 | 346 | 25 | |
| Exhaust pipe x Exhaust manifold | 62 | 630 | 46 | |
| Exhaust pipe x Exhaust pipe | 48 | 490 | 35 | |
| Front suspension member bracket LH x Body | 33 | 336 | 24 | |
| Front suspension member bracket x Body | 33 | 336 | 24 | |
| Speed sensor x Automatic transmission | 5.4 | 55 | 48 in.lbf | |
| Drain plug x Oil pan | 28 | 285 | 21 | |
| Transmission wire set bolt x Automatic transmission | 8.0 | 83 | 71 in.lbf | |
| Transmission wire clamp x Valve body | A | 10 | 100 | 7 |
| B | 11 | 110 | 8 | |
| Oil strainer x Valve body | 10 | 100 | 7 | |
| Oil pan x Transmission case | 4.4 | 45 | 39 in.lbf | |
| Shift solenoid valve Six Valve body | 6.4 | 65 | 56 in.lbf | |
| Shift solenoid valve S2 x Valve body | 10 | 100 | 7 | |
| Shift solenoid valve SR x Valve body | 6.4 | 65 | 56 in.lbf | |
| Shift solenoid valve SLU, SL2 x Valve body | 6.4 | 65 | 56 in.lbf | |
| Shift solenoid valve SLT, SL1 x Valve body | 6.4 | 65 | 56 in.lbf | |
| Valve body x Transmission case | 11 | 110 | 8 | |
| Floor shift assy x Body | 12 | 122 | 9 | |
| Overflow plug x Automatic transmission | 20 | 204 | 15 | |
| Refill plug x Automatic transmission | 39 | 400 | 29 | |
Torque Specifications Table - Automatic Transmission/Transaxle
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Steering wheel set nut | 50 | 510 | 37 |
| Steering wheel pad set screw (torx® screw) | 8.8 | 90 | 78 in.lbf |
| Steering column assy set nut | 26 | 270 | 20 |
| Steering sliding yoke x Intermediate shaft No.2 | 36 | 370 | 26 |
| Power steering gear box x Intermediate shaft No.2 | 36 | 370 | 26 |
| Steering sliding yoke x Intermediate shaft | 36 | 370 | 26 |
| Steering intermediate shaft cover | 5 | 50 | 44 in.lbf |
STEERING COLUMN TORQUE SPECIFICATIONS TABLE
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| VANE PUMP ASSY | |||
| Vane pump housing rear x Vane pump housing front | 24 | 240 | 17 |
| Pressure port union | 83 | 850 | 61 |
| Suction port union set bolt | 13 | 130 | 9 |
| Vane pump assy x Engine | 43 | 438 | 32 |
| Vane pump assy x Stud bolt | 22 | 224 | 16 |
| Vane pump pulley set nut | 44 | 449 | 32 |
| Pressure feed tube assy x Vane pump assy | 51 | 520 | 38 |
| POWER STEERING LINK ASSY | |||
| Control valve housing set bolt | 18 | 184 | 13 |
| Bearing guide nut | 25 | 250 | 18 |
| Cylinder end stopper | 145 | 1,479 | 107 |
| Rack guide spring cap | 25 | 250 | 18 |
| Rack guide spring cap lock nut | 69 (65) | 700 (660) | 51 (48) |
| Power steering rack x Rack end | 103 (98) | 1,050 (1,000) | 76 (72) |
| Tie rod assy lock nut | 88 | 897 | 65 |
| Turn pressure tube union nut | 25 (23) | 250 (230) | 18 (17) |
| Power steering link assy set bolt and nut | 100 | 1,020 | 74 |
| Pressure feed and return tubes x Control valve housing | 44 (42) | 449 (428) | 32 (31) |
| Pressure feed tube clamp set bolt | 28 | 286 | 21 |
| Outlet return tube | 44 (42) | 449 (428) | 32 (31) |
| Outlet return tube clamp set bolt | 28 | 286 | 21 |
| Tie rod end x steering knuckle | 91 | 928 | 67 |
| Stabilizer barfront bracket set bolt | 40 | 408 | 30 |
| Stabilizer linkx Steering knuckle | 70 | 714 | 52 |
| ( ): For use without SST | |||
Torque Specifications Table - Power Steering
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| AIR CONDITIONER RADIATOR ASSY | ||||
| Air conditioning tube assy x Cooler evaporator sub-assy No. 1 | 3.5 | 35 | 30 in.lbf | |
| Air conditioner unit assy x Body | 5.4 | 55 | 48 in.lbf | |
| Air conditioner unit assy x Instrument panel reinforcement | 9.8 | 100 | 87 in.lbf | |
| Wiring harness x Instrument panel reinforcement | 8.3 | 85 | 73 in.lbf | |
| Steering column assy x Instrument panel reinforcement | 26 | 265 | 19 | |
| BLOWER ASSY | ||||
| Blower assy x Body | 5.4 | 55 | 48 in.lbf | |
| Blower assy x Instrument panel reinforcement | 9.8 | 100 | 87 in.lbf | |
| COOLER COMPRESSOR ASSY (2UZ-FE) | ||||
| Magnet clutch hub x Cooler compressor assy | 18 | 183 | 13 | |
| Compressor and magnetic clutch x Engine | (Bolt) | 46 | 469 | 34 |
| Compressor and magnetic clutch x Engine | (Nut) | 24 | 245 | 18 |
| Discharge hose sub-assy x Compressor and magnetic clutch | 9.8 | 100 | 87 in.lbf | |
| Suction hose sub-assy x Compressor and magnetic clutch | 9.8 | 100 | 87 in.lbf | |
| COOLER CONDENSER CORE | ||||
| Cap x Cooler condenser core | 2.9 | 29 | 25 in.lbf | |
| Cooler condenser cushion No.1 x Cooler condenser core | 5.4 | 55 | 48 in.lbf | |
| Cooler condenser cushion No.2 x Cooler condenser core | 5.4 | 55 | 48 in.lbf | |
| Cooler condenser bracket No. 1 x Cooler condenser core | 5.4 | 55 | 48 in.lbf | |
| Air conditioning tube assy x Cooler condenser core | 5.4 | 55 | 48 in.lbf | |
| Discharge hose sub-assy x Cooler condenser core | 5.4 | 55 | 48 in.lbf | |
| COOLING (REAR) UNIT ASSY | ||||
| Air conditioning tube assy x Evaporator sub-assy (rear) | 5.4 | 55 | 47 in.lbf | |
| Pipe cooler refrigerant suction B x Cooling (rear) unit assy | 9.8 | 100 | 87 in.lbf | |
| C pipe cooler refrigerant liquid x Cooling (rear) unit assy | 9.8 | 100 | 87 in.lbf | |
Torque Specifications Table - Heater & Air Conditioning
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Horn button assy x Steering wheel assy | 8.8 | 90 | 78 in.lbf |
| Steering wheel assy x Steering column assy | 50 | 510 | 37 |
| Instr pnl pass I/door airbag assy x Instrument panel reinforcement | 20 | 200 | 14 |
| Curtain shield airbag assy x Body | 9.8 | 100 | 87 in.lbf |
| Airbag sensor assy center x Body | 17.5 | 178 | 13 |
| Airbag sensor front x Body | 7.5 | 76 | 66 in.lbf |
| Side airbag sensor assy RH x Body | 17.5 | 178 | 13 |
| Airbag sensor rear RH x Body | 17.5 | 178 | 13 |
| Seat position airbag sensor x Front seat assy LH | 8.0 | 82 | 71 in.lbf |
SUPPLEMENTAL RESTRAINT SYSTEM TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| FRONT SEAT BELT | |||
| Front seat outer belt assy RH (Upper part of retractor) x Body | 8.0 | 80 | 71 in.lbf |
| Front seat outer belt assy RH (Lower part of retractor) x Body | 42 | 420 | 31 |
| Front seat inner belt assy RH x Front seat | 42 | 420 | 31 |
| Front shoulder belt anchor adjuster assy x Body | 42 | 420 | 31 |
| Front seat outer belt floor anchor x Body | 42 | 420 | 31 |
| Front seat outer belt shoulder anchor x Body | 42 | 420 | 31 |
| REAR SEAT BELT | |||
| Rear seat belt assy outer (Upper part of retractor) x Body | 8.0 | 80 | 71 in.lbf |
| Rear seat belt assy outer (Lower part of retractor) x Body | 42 | 420 | 31 |
| Rear seat belt assy outer floor anchor x Body | 42 | 420 | 31 |
| Rear seat belt assy outer shoulder anchor x Body | 42 | 420 | 31 |
| Rear seat belt assy inner x Rear No. 1 seat assembly RH | 42 | 430 | 31 |
| Rear No. 1 seat belt assy inner LH x Rear No. 1 seat assy RH | 42 | 430 | 31 |
| No. 1 seat 3 point type belt assy LH x Rear No. 1 seat assembly RH | 42 | 430 | 31 |
| Rear No. 2 seat belt assy outer RH x Body | 42 | 420 | 31 |
| Rear No. 2 seat belt assy outer floor anchor x Body | 42 | 420 | 31 |
| Rear No. 2 seat belt assy outer shoulder anchor x Body | 42 | 420 | 31 |
| Rear No. 2 seat belt sub-assy inner x Rear No. 2 seat assy | 42 | 420 | 31 |
| Rear No. 2 seat belt sub-assy inner LH x Rear No. 2 seat assy | 42 | 420 | 31 |
| Rear seat belt sub-assy inner x Rear No. 2 seat assy | 42 | 420 | 31 |
| Rear seat outer belt sub-assy x Rear No. 2 seat assy | 42 | 420 | 31 |
| Rear No. 2 seat belt sub-assy inner x Rear No. 2 seat assy | 42 | 420 | 31 |
SEAT BELT TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| FF Wiper motor x Wiper link | 7.5 | 76 | 66 in.lbf |
| FF Wiper link x Body | 7.0 | 71 | 62 in.lbf |
| FR Wiper arm RH x Wiper link | 25 | 254 | 18 |
| FR Wiper arm LH x Wiper link | 25 | 254 | 18 |
| RR Wiper motor x Body | 5.5 | 56 | 49 in.lbf |
| RR Wiper arm x RR Wiper motor | 5.5 | 56 | 49 in.lbf |
TORQUE SPECIFICATION
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Amplifier Antenna Assy x Body | 8 | 82 | 71 in.lbf |
AUDIO & VISUAL SYSTEM TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| HIGH PITCHED HORN ASSY | |||
| High pitched horn assy x Body | 20 | 199 | 15 |
| LOW PITCHED HORN ASSY | |||
| Low pitched horn assy x Body | 20 | 199 | 15 |
| TELEPHONE ANTENNA BASE | |||
| Telephone Antenna Base x Body | 3 - 9 | 31 - 92 | 20 - 80 in.lbf |
Torque Specifications Table - Communication
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| OUTER REAR VIEW MIRROR ASSY LH | |||
| Outer rear view mirrror assy x Front door | 8.0 | 82 | 71 in.lbf |
Torque Specifications Table - Windshield
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Instrument Panel Reinforcement x Airbag | 20 | 204 | 14 |
INSTRUMENT PANEL TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Seat position airbag sensor x Front seat adjuster assy | (Driver Seat) | 8.0 | 82 | 71 in.lbf |
| Front seat track assy outer LH x Front seat adjuster assy | (Driver Seat) | 42 | 430 | 31 |
| Power seat motor assy (Front vertical) x Front seat adjuster assy | Bolt | 4.9 | 50 | 43 in.lbf |
| Nut | 25 | 255 | 18 | |
| Power seat motor assy (lifter) x Front seat adjuster assy | Bolt | 4.9 | 50 | 43 in.lbf |
| Nut | 25 | 255 | 18 | |
| Power seat motor assy (Slide) x Front seat adjuster assy | Bolt | 4.9 | 50 | 43 in.lbf |
| Nut | 25 | 255 | 18 | |
| Power seat motor assy (Reclining) x Front seat adjuster assy | 4.9 | 50 | 43 in.lbf | |
| Front seatback cover bracket x Front seat adjuster assy (w/ Side airbag) | 5.5 | 56 | 49 in.lbf | |
| Seat armrest assy x Front seat adjuster assy | 37 | 377 | 27 | |
| Front seat Inner belt assy LH x Front seat adjuster assy | 42 | 428 | 31 | |
| Front LH seat assy x Body | 37 | 377 | 27 | |
| Rear No. 1 seat LH and RH x Body | 37 | 375 | 27 | |
| Rear seat belt inner x Rear seat cushion frame | 42 | 430 | 31 | |
| Rear seat belt inner No. 2 x Rear seat cushion frame | 42 | 430 | 31 | |
| Rear seat 3-joint type belt assy LH x Rear seat cushion frame | 42 | 430 | 31 | |
| Rear seatback frame x Rear seat cushion frame | 50 | 510 | 37 | |
| Seat No. 1 cushion frame x Rear seat frame | 18 | 185 | 13 | |
| Rear seat belt inner x Rear seat frame | 42 | 430 | 31 | |
Torque Specifications Table - Seat
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Sliding roof glass assembly x Drive cable | 4.0 | 41 | 35 in.lbf |
| Sliding roof housing sub-assy x Body | 5.5 | 56 | 49 in.lbf |
| Sliding roof housing sub-assy x Sliding roof drive gear | 5.4 | 55 | 48 in.lbf |
SLIDING ROOF TORQUE SPECIFICATIONS TABLE
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| HOOD | |||
| Auxiliary catch hookx Hood panel | 8.0 | 81 | 72 in.lbf |
| Auxiliary catch release lever x Hood panel | 8.0 | 82 | 71 in.lbf |
| Hood hinge x Boby | 13 | 130 | 10 |
| Hood hinge x Hood panel | 13 | 130 | 10 |
| Hood lock x Hood panel | 8.0 | 82 | 71 in.lbf |
| Hood support x Hood panel | 17.5 | 180 | 13 |
| Hood support x Body | 17.5 | 180 | 13 |
| Radiator grille x Hood panel | 5.5 | 56 | 49 in.lbf |
| FRONT DOOR | |||
| Door check x Body | 30 | 306 | 22 |
| Door check x Door panel | 5.5 | 56 | 49 in.lbf |
| Door frame sub-assy rear lower x Door panel | 5.0 | 51 | 44 in.lbf |
| Door glass x Door panel | 8.0 | 82 | 71 in.lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 26 | 265 | 19 |
| Door lock x Door panel | 5.0 | 51 | 42 in.lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Door outside handle cover x Door panel | 7.0 | 71 | 62 in.lbf |
| Door outside handle frame x Door panel | 7.0 | 71 | 62 in.lbf |
| Door wire x Door panel | 8.0 | 82 | 71 in.lbf |
| Outer view mirror x Door panel | 8.0 | 82 | 71 in.lbf |
| Power window regulator motor x Window regulator | 5.4 | 55 | 48 in.lbf |
| Window regulator x Door panel | 8.0 | 82 | 71 in.lbf |
| REAR DOOR | |||
| Division bar x Door panel | 5.0 | 51 | 44 in.lbf |
| Door check x Body | 30 | 306 | 22 |
| Door check x Door panel | 5.5 | 56 | 49 in.lbf |
| Door glass x Door panel | 8.0 | 82 | 71 in.lbf |
| Door hinge x Body | 26 | 265 | 19 |
| Door hinge x Door panel | 26 | 265 | 19 |
| Door lock x Door panel | 5.5 | 56 | 49 in.lbf |
| Door lock striker x Body | 23 | 235 | 17 |
| Door outside handle cover x Door panel | 7.0 | 71 | 62 in.lbf |
| Door outside handle frame x Door panel | 4.0 | 41 | 35 in.lbf |
| Outer view mirror x Door panel | 8.0 | 82 | 71 in.lbf |
| Power window regulator motor x Window regulator | 5.4 | 55 | 48 in.lbf |
| Window regulator x Door panel | 8.0 | 82 | 71 in.lbf |
| BACK DOOR | |||
| Door hinge x Door panel | 8.0 | 82 | 71 in.lbf |
| Door hinge x Body | 8.0 | 82 | 71 in.lbf |
| Door lock x Door panel | 8.0 | 82 | 71 in.lbf |
| Door lock striker x Body | 27 | 275 | 20 |
| Door link x Stay bracket | 18 | 184 | 13 |
| Door stay x Body | 18 | 184 | 13 |
| Door stay x Door panel | 18 | 184 | 13 |
| Wiper arm x Wiper motor | 5.5 | 56 | 49 in.lbf |
| Wiper motor x Door panel | 5.5 | 55 | 49 in.lbf |
| Door outside handle x Door panel | 5.0 | 51 | 42 in.lbf |
Torque Specifications Table - Engine Hood/Door
| Part Tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| FRONT BUMPER COVER | |||
| Front bumper reinforcement x Body | 65 | 663 | 48 |
| Front bumper stay No. 2 x Body | 8.0 | 82 | 71 in.lbf |
| Front bumper side support x Body | 3.0 | 31 | 27 in.lbf |
| Front bumper cover x Body | 8.0 | 82 | 71 in lbf |
| Front bumper cover lower x Body | 8.0 | 82 | 71 in.lbf |
| REAR BUMPER COVER | |||
| Rear bumper cover x Body | 8.0 | 82 | 70 in.lbf |
| Rear bumper side support x Body | 3.0 | 31 | 27 in.lbf |
| Rear bumper reinforcement No. 1 x Body | 25 | 255 | 18 |
| ROOF HEADLINING | |||
| Front seat outer belt x Body | 42 | 430 | 31 |
| ROOF DRIP SIDE FINISH MOULDING LH | |||
| Roof rack bracket front x Body | 10.0 | 102 | 7.4 |
| SIDE STEP | |||
| Side step bracket x Body | 18 | 184 | 13 |
| Side step bracket x Step sub-assy | 5.0 | 51 | 44 in.lbf |
Torque Specifications Table - Trim