DESCRIPTION & OPERATION
| WARNING | Vehicles are equipped with air bag supplemental restraint system. Before attempting any repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in AIR BAG RESTRAINT SYSTEMS article. |
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
With the ignition switch turned on, the current flows to terminal No. 17 of the front wiper and washer switch, and terminal No. 2 of the front wiper motor through the WIPER fuse (25-amp), terminal No. 2 of the washer motor through the WASHER fuse (20-amp). See WIRING DIAGRAMS .
Washer Continuous Operation
With washer switch turned to on, the current flows from terminal No. 2 of the washer motor to terminal No. 1 to terminal No. 11 of the front wiper and washer switch to terminal No. 2 to GROUND and causes to the washer motor to run, and the window washer emits a water spray. This causes the current to flow to washer continuous operation circuit in terminal No. 17 of the front wiper and washer switch to terminal No. 7 to terminal No. 5 of the front wiper motor to terminal No. 4 to GROUND and operates the wiper.