PRECAUTION
Note. When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Smart Access System with Push Button Start (Door Lock) Refer to INITIALIZATION
- PRECAUTIONS WHEN USING THE TECHSTREAM When using the Techstream to troubleshoot with the engine switch off: Connect the Techstream to the DLC3, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and the vehicle begins. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).
Scheme 196
Scheme 197
- DOOR BUS LINES