| A/C Compressor-To-Front Mounting Plate & Cylinder Block | 18 (25) |
| Alternator-To-Front Mounting Plate | 33 (45) |
| Ancillary Drive Belt Tensioner Bolts | 18 (25) |
| Camshaft Rear Gear Bolts (1) |
| Stage 1 | 20 (27) |
| Stage 2 | 90° Further |
| Crankshaft Pulley Bolt | 118 (160) |
| Engine Lifting Bracket & Front Mounting Plate Bolts-To-Engine Block |
| M8 | 18 (25) |
| M10 | 33 (45) |
| Engine Lower Steady-To-Subframe Bolt | 74 (100) |
| Engine Lower Steady-To-Sump Mounting Bolt | 74 (100) |
| Engine Mounting Bracket-To-Engine Front Plate Bolts | 33 (45) |
| Engine Upper Right Steady-To-Top Arm Bolts | 74 (100) |
| Engine Upper Right Steady-To-Body Bolt | 74 (100) |
| Engine Front Mounting Plate-To-Cylinder Block & IRD Bracket (2) |
| M10 Bolt No. 1 | 18 (25) |
| M12 Bolts No. 2, 3, 4, 6 & 7 | 63 (85) |
| M10 Bolt No. 5 | 33 (45) |
| Heat Shield - Rear Timing Belt Right Cover Bolts |
| M6 | 7 (9) |
| M8 | 18 (25) |
| Idler Pulley-To-Engine Front Mounting Plate Allen Bolt | 33 (45) |
| Intake Camshaft Front Gear Bolts |
| Stage 1 | 20 (27) |
| Stage 2 | 90° Further |
| Intake Manifold Chamber-To-Intake Manifolds Bolts | 13 (18) |
| Intake Manifold-To-Cylinder Head Nuts & Bolts | 18 (25) |
| PAS Pipe-To-Engine Front Mounting Plate Bolt | 18 (25) |
| PAS Pipe Support Bracket-To-Right Hydramount Nut | 63 (85) |
| Road Wheel Lug Nuts | 85 (115) |
| Timing Belt Front Tensioner Plunger Patchlok Bolts | 18 (25) |
| Top Arm Bracket-To-Engine Front Plate & Right Mounting Bracket Bolts | 74 (100) |
| Top Arm-To-Right Hydramount Nut | 63 (85) |
| Underbelly Panel Frame Bolts | 33 (45) |
| INCH Lbs. (N.m) |
| Battery Lead-To-Alternator | 71 (8) |
| Battery Lead-To-Starter Solenoid | 88 (10) |
| Dipstick Tube-To-Sump & Cylinder Block Bolt | 80 (9) |
| Fuel Rail-To-Intake Manifold Bolts | 80 (9) |
| Ground Lead-To-Right Camshaft Cover Bolt | 80 (9) |
| Intake Manifold Chamber Support Bracket-To-Right Camshaft Cover Bolts | 88 (10) |
| PAS Pump Pulley Torx Screws | 80 (9) |
| Timing Belt Front Cover Bolts | 35 (4) |
| Timing Belt Front Cover Backplate-To-Cylinder Block Bolts (3) | 80 (9) |
| Timing Belt Rear Cover Backplate-To-Cylinder Block Bolts (3) | 80 (9) |
| Timing Belt Rear Cover Bolts | 35 (4) |
| Underbelly Rear Panel Bolts | 71 (8) |
| (1) NEW bolts must be installed. (2) Tighten bolts in sequence to specified torque value for each bolt. (Схема №20) (3) Apply sealant No. STC50552 to bolt threads. |
