- Raise and support front of vehicle. DO NOT work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Remove 2 screws securing bumper valance to underbelly panel brackets.
- Remove 4 screws securing wheel arch liners to bumper valance, if equipped. Remove 2 bolts securing rear of underbelly panel. Remove 6 bolts securing underbelly panel frame. Remove underbelly panel.
- To install, position underbelly panel. Install bolts securing underbelly panel frame and tighten to specification. See «TORQUE SPECIFICATIONS»(ref-159181-S03504048662003111700000) . Install bolts securing rear of underbelly panel and tighten to specification.
- Install and tighten screws securing wheel arch liners to bumper valance, if equipped. Install and tighten screws securing bumper valance to brackets. Remove stands and lower vehicle.
Home/Land Rover/Freelander/Land Rover Freelander L314 (2003-2006)/Repair manual/Timing Belt/Removal & Installation
Contents
Wiring diagrams Section: Timing Belt- Manufacturer's Suggested Scheduled Maintenance
- Component Location
- Removal & Installation
- Front Timing Belt
- Removal (up to 2003 Model Year)
- Removal (from 2003 Model Year)
- Rear Timing Belt
- Torque Specifications
- Abbreviations
- Accessories Control Systems
- Accessory Drive Belts
- Airbag
- Anti-Lock/traction Control
- Automatic HVAC System
- Automatic Trans
- Axle Shafts
- Basic Trouble Shooting
- Body Electrical
- Brakes
- Cabin Air Filter
- Charging System
- Check Lists
- Collision/avoidance
- Computer Relearn
- Cooling Fan
- Cooling System (mechanical)
- Cruise Control Systems
- Diagnostic Connector Locations
- Differentials & Drive Axles
- Door Locks & Anti-Theft Systems
- Drive Cycles
- Driveline/axles
- Driveshaft & Universal Joints
- DTC Index
- Electrical
- Electrical Component Locations
- Emission Applications
- Engine
- Engine Control Systems
- Engine Performance
- Entertainment Systems
- Exhaust
- Exterior Body Panels
- Exterior Lights
- Exterior/interior Trim
- Fuel System
- Fuses & Circuit Breakers
- Gauges & Instrument Panels
- Heated Glass/defoggers
- Heater
- Hoist/jack
- Identification
- Interior/illumination Lights
- Manual & Power Steering
- MAP Guidelines
- Mechanical
- Mechanical - Hydraulic
- Memory Modules
- Metric Conversions
- Mirrors
- Mode 6
- Navigation System
- Oem General Information
- Procedures
- Reset Procedures
- Restraints
- Seats
- Specifications
- Starter
- Steering
- Steering Column Switches
- Sun Roof/t-Top/convertible Top
- Suspension Front
- Suspension Rear
- Testing & Diagnostics
- Timing Belt
- Traction Control Disable
- Transmission
- Warning System
- Wheel Alignment
- Windows
- Wiper/washer Systems
- Wiring System (data Link Connectors, Pwr Dist., Grnd Dist.)