Home/Jeep/Compass/Jeep Compass I (2006-2010)/Repair manual/Hoist/jack/Lubrication & Maintenance: Specifications
Contents Wiring diagrams Section: Hoist/jack All sections

Lubrication & Maintenance: Specifications Jeep Compass I

SPECIFICATIONS

ComponentFluids, Lubricants and Genuine Parts
Engine CoolantMopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
Engine Oil (2.4L Standard, 2.4L Standard Turbo)Use API Certified SAE 5W-30 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting DaimlerChrysler Material Standard MS-6395.
Engine Oil Filter (2.4L Non Turbo)Mopar ® 4105409AB or equivalent.
Engine Oil Filter (2.4L Turbo)Mopar ® 4781452BB or equivalent.
Spark Plugs (2.4L Non Turbo)Champion ® RE16MC, 040" Gap
Spark Plugs (2.4L Turbo)Champion ® RE14MCC5.050" Gap.
Fuel Selection (2.4L and 2.4L Standard Turbo )87 Octane
Fuel Selection (High Output 2.4L Turbo)91 Octane

ENGINE

ComponentFluids, Lubricants and Genuine Parts
Engine CoolantMopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
Engine Oil - Gasoline (Non ACEA Categories)For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395. These Certified Oils exhibit the American Petroleum Institute (API) Engine Oil Certification Symbol on the front of the oil container. This symbol means that the oil has been tested, certified and licensed by the American Petroleum Institute (API) to meet the oil standards required by the manufacturers.
Engine Oil - Gasoline (ACEA Categories)For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A1/B1, A2/B2 or A3/B3.
Engine Oil - DieselUse only Diesel Engine Oils conforming to API (American Petroleum Institute) Quality CH-4 or CI-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B3 or A3/B4.
Oil Filter 2.2 Liter Turbo Diesel EnginesMopar ® 05080244AA or equivalent.
Oil Filter 2.4 Liter Non-Turbo EnginesMopar ® 4105409AB or equivalent.
Oil Filter 2.4 Liter Turbo EnginesMopar ® 04781452BB or equivalent.
Spark Plugs (2.4 Liter Engines)Use Champion® RE16MC, 040" Gap
Fuel Selection (2.4 Liter Engines)95 Research Octane
Fuel Selection (2.2 Liter Diesel Engines.)50 Cetane CAUTION: Bio-diesel formulations are not approved for use and may result in damage to the fuel system.
Fuel Filter Diesel EnginesMopar ® 05080825AA
CAUTION
Bio-diesel formulations are not approved for use and may result in damage to the fuel system.

ENGINE - EXPORT

ComponentFluids, Lubricants and Genuine Parts.
Automatic Transmission Fluid.Mopar ® ATF+4 Automatic Transmission Fluid MS-9602.
Manual Transmission Fluid.Mopar ® ATF+4 Automatic Transmission Fluid MS-9602.
Brake Master CylinderMopar ® DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids or equivalent.
Power Steering ReservoirMopar ® Power Steering Fluid +4 or Mopar ® ATF+4 Automatic Transmission Fluid or equivalent.

CHASSIS

DESCRIPTIONU.S.Metric
Fuel (Approximate)15 Gallons56.7 Liters
Engine Oil-With Filter
2.4 Liter Engines (Use API Certified SAE 5W-30 Engine Oil.5.0 Quarts4.7 Liters
Cooling System *
2.4 Liter Engines (Mopar ® Antifreeze/Coolant 5 Year/100,000 Miles Formula), or equivalent.6.5 Quarts6.2 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
Power Steering System
Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to STEERING article for proper fill and bleed procedures.
A/C Refrigerant
All Models1.125 lbs0.51 kg
Automatic Transaxle
Automatic Transaxle - Estimated Service Fill4.0 Quarts.3.8 Liters
Automatic Transaxle - Overhaul Fill Capacity with Torque Converter Empty8.6 Quarts.8.1 Liters
Manual Transaxle
Manual Transaxle - NV T3552.5 - 2.8 Quarts.2.4 - 2.7 L
Manual Transaxle - Getrag DMT62.4L Turbo:(1.9 Quarts.)2.4L Turbo: 1.8 Liters
*(includes new filter)

CAPACITIES

DESCRIPTIONMetricU.S.
Fuel (Approximate)56.7 Liters15.0 Gallons
Engine Oil
2.4 Liter Engines (ACEA A1/B1, A3/B4 or A3/B3)4.7 Liters5.0 Quarts
2.2 Liter Diesel Engine (10W-40,API CH-4 or ACEA A3/B3, A3/B4)7.0 Liters7.4 Liters
Cooling System *
2.4 Liter Engine (Mopar ® Antifreeze/Coolant 5 Year/100,000 Mile Formula)6.2 Liters6.5 Quarts
2.2 Liter Diesel Engines9.0 Liters9.5 Quarts
* Includes heater and coolant recovery bottle filled to MAX level.
Power Steering System
Power steering fluid capacities are dependent on engine/chassis options as well as steering gear/cooler options. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these capacities may vary. Refer to STEERING for proper fill and bleed procedures.
A/C Refrigerant
All Models1.125 lbs0.51 kg
Automatic Transaxle
Automatic Transaxle - Estimated Service Fill4.0 Quarts.3.8 Liters
Automatic Transaxle - Overhaul Fill Capacity with Torque Converter Empty8.6 Quarts.8.1 Liters
Manual Transaxle
Manual Transaxle - NV T3552.5 - 2.8 Quarts.2.4 - 2.7 L
Manual Transaxle - AISIN BG62.0L Turbo Diesel: (2.1 Quarts.)2.0L Turbo Diesel: 2.0 Liters
Manual Transaxle - Getrag DMT62.4L Turbo:(1.9 Quarts.)2.4L Turbo: 1.8 Liters
*(includes new filter)

CAPACITIES - EXPORT