Note. This DTC can only be cleared following an ignition OFF/ON cycle after rectification. Attempts to clear without cycling the ignition will result in the DTC reflagging 3-4 seconds after clearing. DTC P1260 can be flagged as a result of a time-out situation within the security system. If the engine cranks with P1260 flagged, clear the code and recheck the DTCs.
Note. After each repair, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES/ECM RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and ECM connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams and all other terminal identification, see WIRING DIAGRAMS .