Note. The clearance between the Crankshaft Position (CKP) sensor and the reluctor ring should be checked at 90 degree intervals. The air gap between the 2 should be no greater than 0.18" (4.5 mm) at any point.
Note. After each repair, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES/ECM RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and ECM connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams and all other terminal identification, see WIRING DIAGRAMS .