Automatic Transmission/transaxle External Controls: Removal & Installation Jaguar XJ X351

REMOVAL

Note. Removal steps in this procedure may contain installation details.

Scheme 52

Scheme 53

Scheme 54

Scheme 55

1. See figure.
2. Torque: 2 Nm.
3. See figure.
4. See figure.
5. Torque: 4 Nm.

INSTALLATION

1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Note. Some variation in the illustrations may occur, but the essential information is always correct.

Scheme 56

Scheme 57

1. See figure.
2. Torque: 2 Nm.

1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 58

Scheme 59

Scheme 60

Scheme 61

Scheme 62

Scheme 63

Scheme 64

1. Raise and support the vehicle.
2. Remove the 2 rivets.
3. Torque: 11 Nm
4. See figure.
5. See figure.
6. Lower the vehicle.
7. Refer to «FLOOR CONSOLE SIDE TRIM PANEL»(ref-570110-S32094191572013080600000) .
8. See figure.
9. Torque: 2.5 Nm
10. See figure.

Scheme 65

1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Note. Some variation in the illustrations may occur, but the essential information is always correct.

Scheme 66

1. Torque: 3 Nm.

1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Note. Some variation in the illustrations may occur, but the essential information is always correct.

1. Torque: 3 Nm.

1. To install, reverse the removal procedure.