Contents Wiring diagrams Section: Charging System All sections

Generators & Regulators: Diagnosis Isuzu Rodeo II

Charging System ~155 words

TROUBLE SHOOTING

Note. See TROUBLE SHOOTING article in GENERAL INFORMATION.

CHARGING SYSTEM FUNCTIONAL TEST

  1. Visually check generator belt and wiring. Turn ignition switch to ON position and observe battery indicator light. If indicator light does not come on, go to next step. If indicator light comes on, go to step 3 .
  2. Disconnect generator connector. Connect a fused jumper wire between ground and generator connector terminal "L" (White/Blue wire). See «WIRING DIAGRAMS»(ref-91530-S33630450502001032400000) . If battery indicator light comes on, replace generator. If battery indicator light does not come on, check for burned out bulb, poor connection or faulty circuit.
  3. Start engine and observe battery indicator light. If indicator light goes out, system is operating normally. If indicator light does not go out, check charging system. See «CHARGING SYSTEM TEST»(ref-91530-S05296288982001032400000) .

CHARGING SYSTEM TEST

WARNINGTo avoid a battery explosion, ensure carbon pile tester is OFF before connecting it to battery.

GENERATOR OUTPUT TEST

Note. Testing information is not available from manufacturer for Passport, Rodeo and Rodeo Sport 2.2L.