RECOMMENDED FLUID
Manufacturer recommends Dexron-III ATF for use in this transmission. Fill to appropriate level. See FLUID CAPACITIES .
OIL COOLER FLUSHING
- If available, fill line flusher with solution and install Oil Cooler and Line Flusher (J-35944) to top transmission cooler line on transmission. Follow equipment manufacturer's instructions to flush oil cooler and cooler lines.
- If flusher tool is not available, flush cooler and cooler lines with a mixture of clean solvent and water. Flush cooler in both directions until all old fluid and debris is removed. If necessary, replace plugged or damaged cooler and/or lines.
Fluid Overheating & Leaking From Vent
Fluid level too high, torque converter clutch not functioning, or there is an extreme load in default mode or in winter mode.