Automatic Transmission Overhaul & Testing - 4L30-E: Adjustments — Automatic Transmission Overhaul & Testing - 4L30-E — Automatic Trans

Automatic Transmission Overhaul & Testing - 4L30-E: Adjustments Isuzu Rodeo II

BRAKE BAND ADJUSTMENT

Drain fluid. Remove bolts, main case oil pan and gasket. (Схема №7) Remove bolts, servo cover and gasket. Loosen lock nut on servo adjusting screw.
Using INCH-lb. torque wrench, tighten servo adjusting screw to 40 INCH lbs. (4.5 N.m). Back off servo adjusting screw 5 turns. Hold sleeve on servo piston. Tighten lock nut to 14 ft. lbs. (19 N.m). Ensure servo adjusting screw does not rotate while tightening lock nut.
Using NEW gasket, install servo cover. Install and tighten bolts to specification. See «TORQUE SPECIFICATIONS»(ref-11650-S10257221442000112200000). Using NEW gasket, install main case oil pan. Install and tighten bolts to specification. Fill transmission with appropriate fluid to proper level. See «LUBRICATION»(ref-11650-S38070317202000112200000).