Power Window Control System: Removal & Installation Infiniti M37 IV

INSTALLATION

Install in the reverse order of removal.

Note. If power window main switch or front power window switch (passenger side) is replaced or is removed, it is necessary to perform the initialization procedure. The same procedure is also performed for front power window switch (passenger side).

Scheme 4

Scheme 5

1. Remove the rear door finisher. Refer to " «REAR DOOR FINISHER: REMOVAL AND INSTALLATION»(ref-573586-S30509693092013082200000) ".
2. Remove the armrest mounting screws (A), and then remove the armrest from the rear door finisher.
3. Remove grip finisher (2) from the armrest.
4. Remove mounting screws (B) of power window switch finisher (1) from the armrest. Remove power window switch finisher (1) from the armrest.
5. Disengage pawls of power window switch finisher (1) from rear power window switch (3), using remover tool. Remove rear power window switch (3).

Install in the reverse order of removal.

Note. If rear power window switch is replaced or is removed, it is necessary to perform the initialization procedure.