APPLICATION ITEM
CONSULT performs the following functions via CAN communication with A/C auto amp.
| Diagnostic mode | Description |
|---|---|
| ECU Identification | Displays the part number of A/C auto amp. |
| Self Diagnostic Result | Displays the diagnosis results judged by A/C auto amp. |
| Data Monitor | Displays the input/output signal of A/C auto amp. |
| Active Test | The signals used to activate each device are forcibly supplied from A/C auto amp. |
| Work support | Changes the setting for each setting function. |
| Configuration | The vehicle specification that is written in A/C auto amp. can be displayed or stored. The vehicle specification can be written when A/C auto amp. is replaced. |
Note. Diagnosis should be performed with engine running. Door motor operation speeds become slower and NO results may be returned even for normal operation if battery voltage drops below 12 V during self-diagnosis.