Home ReviewsRefund
Home/Infiniti/FX50/Infiniti FX50 II (2008-2012)/Repair manual/Automatic Drive Positioner/PASSENGER SIDE: Component Function Check
Contents Wiring diagrams Section: Automatic Drive Positioner All sections

PASSENGER SIDE: Component Function Check Infiniti FX50 II

Automatic Drive Positioner ~544 words

PASSENGER SIDE: Component Function Check

  1. CHECK FUNCTION Turn ignition switch ON. Select "MIR/SEN RH U-D", "MIR/SEN RH R-L" in "Data monitor" with CONSULT-III. Check the mirror sensor (passenger side) signal under the following conditions. DATA MONITOR REFERENCE Monitor item Condition Value MIR/SEN RH U-D Door mirror (passenger side) Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley) MIR/SEN RH R-L Change between 3.4 [V] (close to left edge) 0.6 [V] (close to right edge) Is the indication normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «PASSENGER SIDE: DIAGNOSIS PROCEDURE»(ref-368849-S21639264462010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT SLIDE" in "Active test" mode with CONSULT-III. Check the sliding motor operation. ACTIVE TEST REFERENCE Test item Description SEAT SLIDE OFF Seat sliding Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S24537269442010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT RECLINING" in "Active test" mode with CONSULT-III. Check the reclining motor operation. ACTIVE TEST REFERENCE Test item Description SEAT RECLINING OFF Seat reclining Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S20517112132010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT LIFTER FR" in "Active test" mode with CONSULT-III. Check the lifting motor (front) operation. ACTIVE TEST REFERENCE Test item Description SEAT LIFTER FR OFF Seat lifting (front) Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S16927246902010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT LIFTER RR" in "Active test" mode with CONSULT-III. Check the lifting motor (rear) operation. ACTIVE TEST REFERENCE Test item Description SEAT LIFTER RR OFF Seat lifting (rear) Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S30922265682010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "TILT MOTOR" in "Active test" mode with CONSULT-III. Check the tilt motor operation. ACTIVE TEST REFERENCE Test item Description TILT MOTOR OFF Steering tilt Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S32687484352010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "TELESCO MOTOR" in "Active test" mode with CONSULT-III. Check the telescopic motor operation. ACTIVE TEST REFERENCE Test item Description TELESCO MOTOR OFF Steering telescopic Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S24548325802010081300000) .
  1. CHECK DOOR MIRROR MOTOR FUNCTION Check the operation with "MIRROR MOTOR RH" and "MIRROR MOTOR LH" in "ACTIVE TEST" mode with CONSULT-III Refer to «CONSULT-III FUNCTION»(ref-368849-S35997054572010081300000) . Is the inspection result normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S02470607632010081300000) .
  1. CHECK FUNCTION Turn ignition switch ON. Select "MEMORY SW INDCTR" in "Active test" mode with CONSULT-III. Check the memory indicator operation. ACTIVE TEST REFERENCE Test item Description MEMORY SW INDCTR OFF Memory switch indicator OFF ON-1 Indicator 1: ON ON-2 Indicator 2: ON Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DIAGNOSIS PROCEDURE»(ref-368849-S24604699472010081300000) .