Home/Infiniti/FX50/Infiniti FX50 II (2008-2012)/Repair manual/Automatic Drive Positioner/DRIVER SIDE: Component Function Check

Contents

Wiring diagrams Section: Automatic Drive Positioner

DETAILED FLOW

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL: Special Repair Requirement

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement

SYSTEM INITIALIZATION: Special Repair Requirement

MEMORY STORING: Special Repair Requirement

Setting Change

SYSTEM SETTING: Special Repair Requirement

OUTLINE

CONTROL UNITS

INPUT PARTS

OUTPUT PARTS

DETAIL FLOW

DATA MONITOR

WORK SUPPORT

Special Repair Requirement

DRIVER SEAT CONTROL UNIT: Special Repair Requirement

Component Function Check

CHANGEOVER SWITCH: Component Function Check

MIRROR SWITCH: Component Function Check

DRIVER SIDE: Component Function Check

PASSENGER SIDE: Component Function Check

PHYSICAL VALUES

Fail Safe

REAR WIPER MOTOR PROTECTION

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"

Service

Work

Exploded View

All sections

DRIVER SIDE: Component Function Check Infiniti FX50 II

Automatic Drive Positioner

DRIVER SIDE: Component Function Check

CHECK FUNCTION Turn ignition switch ON. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III. Check mirror sensor (driver side) signal under the following condition. DATA MONITOR REFERENCE Monitor item Condition Value MIR/SEN LH U-D Door mirror (driver side) Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley) MIR/SEN LH R-L Change between 0.6 [V] (close to left edge) 3.4 [V] (close to right edge) Is the indication normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to «DRIVER SIDE: DIAGNOSIS PROCEDURE»(ref-368849-S01919085082010081300000) .