Home/Infiniti/EX35/Infiniti EX35 I (2007-2013)/Repair manual/Cooling System (Mechanical)/Engine Cooling System: Overhaul

Contents

Wiring diagrams Section: Cooling System (Mechanical)

All sections

Engine Cooling System: Overhaul Infiniti EX35 I

Cooling System (Mechanical)

DISASSEMBLY

Disconnect harness connector from cooling fan control module.
Remove cooling fan control module from cooling fan assembly. CAUTION: Handle carefully to avoid dropping and shocks.
Remove cooling fan mounting nuts, and then remove the cooling fan (RH and LH).
Remove fan motors (RH and LH).

ASSEMBLY

Note the following, and assemble in the reverse order of disassembly.

CAUTION

RH and LH cooling fans are different. Be careful not to misassemble them.

Install each fan in the following position. Right side : 9 blades Left side : 11 blades
Secure the harness tightly to the fan shroud to prevent the fan rotation area from being loose.