Multifunction Switch: Removal & Installation Hyundai Tucson II

Installation

1. Install the multifunction switch.
2. Install the clock spring and steering wheel.
3. Install the steering column upper and lower shrouds.

Scheme 8

1. With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multifunction switch

Scheme 9

Scheme 10

Scheme 11

Scheme 12

Scheme 13

Scheme 14

1. With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multifunction switch.

Scheme 15

Scheme 16

Scheme 17

Scheme 18

Scheme 19

Scheme 20

Scheme 21

1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch.
2. If diagnosis is required on the multifunction switch, select model and "IPM".
3. Select "Current data" and check the input/output condition of "Multifunction switch".
4. To perform test on "Multifunction switch" outputs, select "Actuation test".