Button Engine Start System - Hev: Removal & Installation Hyundai Sonata VI

Installation

1. Install the start/stop button.
2. Install the key set bezel.
3. Install the crash pad center lower cover.
4. Install the crash pad lower panel.

Scheme 40

Scheme 41

Scheme 42

1. Disconnect the negative (-) battery terminal.
2. Remove the floor console. (Refer to the " «CONSOLE»(ref-419431-S07116233592011091200000) ")
3. Disconnect the fob holder connector (A).
4. Remove the fob holder (A) by pushing both sides of the hooks.

1. Install the fob holder.
2. Install the floor console.

Scheme 43

Scheme 44

Scheme 45

Scheme 46

Scheme 47

Scheme 48

1. It will be able to diagnose defects of Smart key with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
2. Select model and "Smart key system (Button start)" menu if you want to check PDM.
3. Select "PDM" in the menu.
4. Select "Current Data", if you want to check current data of PDM. It provides the input/output status of each module.
5. If you want to check PDM data operation forcefully, select "Actuation test".

1. Install the power distribution module.
2. Install the glove box housing.