BATTERY SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Type | ||
| 2.4L | MF60AH | |
| 2.7L | MF68AH | |
| A Cold Cranking Amps (1) | ||
| 2.4L | 550 A Minimum | |
| 2.7L | 540 A Minimum | |
| Reverse Capacity | ||
| 2.4L | 92 Minutes | |
| 2.7L | 122 Minutes | |
| Specific Gravity (2) | 1.270-1.290 | |
| (1) At 0°F (-17.8°C). (2) At 77°F (25°C). | ||
| (1) | At 0°F (-17.8°C). |
| (2) | At 77°F (25°C). |
BATTERY SPECIFICATIONS
STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Armature Maximum Runout | ||
| Standard | 0.002" (0 .05 mm) | |
| Limit | 0.0039" (0.1 mm) | |
| Brush Length | (1) | |
| Commutator Outside Diameter | ||
| Standard Diameter | 1.157" (29.4 mm) | |
| Wear Limit | 1.118" (28.4 mm) | |
| Insulator Depth | ||
| Standard Depth | 0.020" (0.5 mm) | |
| Wear Limit | 0.079" (0.2 mm) | |
| No-Load Characteristics | ||
| Terminal Voltage | 11 Volts | |
| Amperage | 90-Amps Maximum | |
| Speed | 2800 RPM Minimum | |
| Number Of Pinion Teeth | 8 | |
| Pinion Gap | 0.02-0.079" (0.5-2.0 mm) | |
| Type | Reduction Drive W/Planetary Gear | |
| Undercut Depth | ||
| Standard | 0.02" (0.5 mm) | |
| Limit | 0.008" 0.2 mm) | |
| Voltage | 12 Volt | |
| (1) Bottom of limit line that is stamped into brush. | ||
| (1) | Bottom of limit line that is stamped into brush. |
STARTER SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Solenoid Battery Terminal Nut | 20-25 (27-33) |
| Starter Mounting Bolts | 20-25 (27-33) |
| INCH Lbs. (N.m) | |
| Battery Terminal | 35.4-53.1 (4-6) |
| Control Lever Coupling Nut | 115 (13) |
| Ignition lock switch | 71-106 (8-12) |
| Starter Motor B+ Terminal Nut | 89-106 (10-12) |
| Transaxle Range Switch Bolt | 89-106 (10-12) |
TORQUE SPECIFICATIONS