Automatic Transmission Control System - 3.8L: Removal & Installation Hyundai Genesis I рестайлинг

Installation

1. Install in the reverse order of removal. NOTE: Adding Automatic Transaxle Fluid (ATF). (Refer to " «FLUID»(ref-590373-S24435723102013121700000) ")

1. Installation is the reverse of removal.

Scheme 583

1. Insert the shift cable to the bracket and hold it with a new clip.
2. Align the manual lever hole to the hole on the transmission case and hold the position with a bar.
3. Eliminate shift cable free play of the shift cable.
4. Firmly hold the special bolt with a spaner and tighten the nut with the specified torque. Tightening torque: 13 ~ 16 N.m (1.3 ~ 1.6 kgf.m, 9.40 ~ 11.57 lb-ft)
5. Take off the bar holding the manual lever.
6. Shifting the each position, check that the shift lever moves smoothly.