Home ReviewsRefund
Home/Hyundai/Elantra/Hyundai Elantra I (1990-1995)/Repair manual/Mechanical/Fitting Pistons
Contents Section: Mechanical All sections

Fitting Pistons Hyundai Elantra I

Mechanical ~107 words
  1. Measure piston skirt diameter .08" (2 mm) above bottom of piston skirt and at 90-degree angle to piston pin. If piston diameter is not within specification, replace piston. See «PISTONS, PINS & RINGS SPECIFICATIONS»(ref-48969-S10257327472001011500000) table under ENGINE SPECIFICATIONS.
  2. Measure cylinder bore diameter in 3 places: .47" (12 mm) from top of bore, .47" (12 mm) from bottom of bore and near center of bore. If cylinder bore diameter or taper is not within specification, machine cylinder bore. See «CYLINDER BLOCK»(ref-48969-S28415360292001011500000) table under ENGINE SPECIFICATIONS.
  3. If piston-to-cylinder bore clearance is not within specification, replace piston and/or machine cylinder bore. See «PISTONS, PINS & RINGS SPECIFICATIONS»(ref-48969-S10257327472001011500000) table.

More articles — 1.6L 4-CYL - VIN [r]