Home ReviewsRefund
Home/Hyundai/Accent/Hyundai Accent III (2006-2011)/Repair manual/Testing & Diagnostics/Engine Control System: Removal & Installation
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Control System: Removal & Installation Hyundai Accent III

Testing & Diagnostics 2 illustrations

Replacement

CAUTIONIn the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together (Refer to " TEACHING PROCEDURES " ).

Scheme 43

Scheme 43
Scheme 43

Scheme 44

Scheme 44
Scheme 44
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM connector (A).
  3. Remove the air cleaner & ECM assembly (Refer to " «ENGINE AND TRANSAXLE ASSEMBLY»(ref-380257) " ).
  4. Remove the ECM mounting bolts (A) and remove the ECM (B).
  5. Install a new ECM. ECM installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
  6. Perform "Key Teaching" procedure (Refer to " «TEACHING PROCEDURES»(ref-380326-S10088108202010121800000) " ).

More articles — Engine Control System