TURNING ANGLE INSPECTION
While applying brake, turn wheel right and left. Measure turning angle of both wheels. See WHEEL ALIGNMENT SPECIFICATIONS table. If turning angle is not within specifications, check for bent or damaged suspension components.
| Application | Preferred | Range |
|---|
| Accord |
| Camber (1) |
| Front | 0 | 1 To 1 |
| Rear |
| 1997 | 0.42 | 0.92 To 0.08 |
| 1998 | 0.5 | 1 To 0 |
| Caster (1) |
| 1997 | 3 | 2 To 4 |
| 1998 | 2.8 | 1.8 To 3.8 |
| Toe-In (2) |
| Front | 0 (0) | 0.08 To 0.08 (- 2.0 To 2.0) |
| Rear | 0.08 (2.0) | 0 To 0.16 (0 To 4.0) |
| Toe-In (1) |
| Front | 0 | 0.16 To 0.16 |
| Rear | 0.16 | 0.0 To 0.32 |
| Toe-Out On Turns (1) |
| Inner | 38.53 | ***** |
| Outer | 31.05 | ***** |
| Civic & Civic Del Sol |
| Camber (1) |
| Front | 0 | 1 To 1 |
| Rear | 1.0 | 2.0 To 0.0 |
| Caster (1) | 1.67 | 0.67 To 2.67 |
| Toe-In (2) |
| Front | 0.04 (1.0) | 0.04 To 0.12 (- 1.0 To 3.0) |
| Rear | 0.08 (2.0) | 0.04 To 0.16 (1.0 To 4.0) |
| Toe-In (1) |
| Front | 0.08 | 0.08 To 0.24 |
| Rear | 0.16 | 0.08 To 0.32 |
| Toe-Out On Turns (1) |
| Inner | 39.83 | ***** |
| Outer | 33.17 | ***** |
| CR-V |
| Camber (1) |
| Front | 0 | 1 To 1 |
| Rear | 1 | 2.00 To 0.00 |
| Caster (1) | 2.17 | 1.17 To 3.17 |
| Toe-In (2) |
| Front | 0 (0) | 0.12 To 0.12 (- 3.0 To 3.0) |
| Rear | 0.08 (2.0) | 0.04 To 0.16 (1.0 To 4.0) |
| Toe-In (1) |
| Front | 0 | 0.24 To 0.24 |
| Rear | 0.16 | 0.08 To 0.32 |
| Odyssey |
| Camber (1) |
| Front | 0 | 1 To 1 |
| Rear | 0.50 | 1.00 To 0.00 |
| Caster (1) | 3 | 2 To 4 |
| Toe-In (2) |
| Front | 0 (0) | 0.08 To 0.08 (- 2.0 To 2.0) |
| Rear | 0 (0) | 0.08 To 0.08 (- 2.0 To 2.0) |
| Toe-In (1) |
| Front | 0 | 0.16 To 0.16 |
| Rear | 0 | 0.16 To 0.16 |
| Toe-Out On Turns (1) |
| Inner | 39 | ***** |
| Outer | 30 | ***** |
| Prelude |
| Camber (1) |
| Front | 0 | 1.0 To 1.0 |
| Rear | 0.75 | 1.75 To 0.25 |
| Caster (1) |
| With ATTS (3) | 4.33 | 3.58 To 5.08 |
| Without ATTS (3) | 2.67 | 1.67 To 3.67 |
| Toe-In (2) |
| Front | 0 (0) | 0.08 To 0.08 (- 2.0 To 2.0) |
| Rear | 0.08 (2.0) | 0 To 0.16 (0.0 To 4.0) |
| Toe-In (1) |
| Front | 0 | 0.16 To 0.16 |
| Rear | 0.16 | 0.0 To 0.32 |
| Toe-Out On Turns (1) |
| Inner |
| With ATTS (3) | 34.83 | ***** |
| Without ATTS (3) | 36.33 | ***** |
| Outer |
| With ATTS (3) | 28.83 | ***** |
| Without ATTS (3) | 29.67 | ***** |
| (1) Measurement in degrees. (2) Measurement in inches (mm). (3) Active Torque Transfer System (ATTS). |
| (1) | Measurement in degrees. |
| (2) | Measurement in inches (mm). |
| (3) | Active Torque Transfer System (ATTS). |
WHEEL ALIGNMENT SPECIFICATIONS
