Home/Honda/Prelude/Honda Prelude V (1996-2001)/Repair manual/Testing & Diagnostics/DTC P1359 - CRANKSHAFT POSITION/TOP DEAD CENTER (CKP/TDC) S…
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P1359 - CRANKSHAFT POSITION/TOP DEAD CENTER (CKP/TDC) SENSOR Honda Prelude V

  1. Perform PCM reset procedure. See «TESTS W/CODES - INTRODUCTION»(ref-16345) article. Start engine. If engine will not start, crank engine continuously for at least 15 seconds. If DTC P1359 is indicated, go to next step. If DTC P1359 is not indicated, problem is intermittent. System is okay at this time. Check for poor connections or loose wires between CKP/TDC sensor and PCM. See «WIRING DIAGRAMS»(ref-16355) article. Repair as necessary.
  2. Check for poor connections or loose wires between CKP/TDC sensor and PCM. See «WIRING DIAGRAMS»(ref-16355) article. Repair as necessary. If wires and connections are okay, substitute a known-good PCM and recheck. If symptom or indication goes away, replace original PCM.