CHECKING FLUID LEVEL
Ensure vehicle is on level surface and at normal operating temperature. Turn engine off. Within one minute after turning engine off, remove transaxle dipstick and wipe it clean. Re-insert dipstick into filler hole and check fluid level. Fluid level should be between upper and lower marks on dipstick.
RECOMMENDED FLUID
On CVT transmissions, use Genuine Honda CVT fluid only. On all other models, use Honda Premium Formula ATF. Use of non-Honda ATF can affect shift performance.
DRAINING & REFILLING
- Ensure transaxle is at normal operating temperature (cooling fan comes on). Remove transaxle drain plug to drain fluid. Install NEW plug gasket. Tighten drain plug to 37 ft. lbs (49 N.m).
- Add fluid through dipstick hole. Start engine. Move gear selector through all selector positions 3 times. Ensure each gear engages. With gear selector in Neutral or Park, let transaxle fluid warm to normal operating temperature. Turn engine off. Check fluid level. Add enough fluid to bring level to upper mark on dipstick.