Home/Honda/Odyssey/Honda Odyssey II (1999-2003)/Repair manual/Testing & Diagnostics/DTC P1106: BARO Sensor Circuit Range/Performance Problem
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P1106: BARO Sensor Circuit Range/Performance Problem Honda Odyssey II

  1. Reset the PCM (see «HOW TO RESET THE PCM»(ref-171136-S26798080882005011100000) ).
  2. Start the engine. Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle.
  3. Test-drive with the transmission in 2 position.
  4. Accelerate for 5 seconds using wide open throttle.
  5. Check for a Temporary DTC with the scan tool or the HDS. Is Temporary DTC P1106 indicated? YES: Substitute a known-good PCM and recheck (see «HOW TO SUBSTITUTE THE PCM FOR TESTING PURPOSE»(ref-171136-S22224174352005011100000) ). If the symptom/indication goes away, replace the original PCM. NO: Intermittent failure, system is OK at this time.