DTC B1152: Gauge Control Module Internal Error (EEPROM error) Honda Insight ZE2

Note. If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back to ON (II).
3. Wait for at least 6 seconds.
4. Check for DTCs with the HDS. Is DTC B1152 indicated? YES -Replace the gauge control module (see «GAUGE CONTROL MODULE REPLACEMENT»(ref-360289-S06783299542010042800000) ). NO -Intermittent failure, the gauge control module is OK at this time.