Home/Honda/Insight/Honda Insight ZE2 (2009-2011)/Repair manual/Automatic Trans/DTC U0301: PGM-FI System and A/T System Program Version Mis…

Contents

Wiring diagrams Section: Automatic Trans

Continuously Variable Transmission (Cvt): Overview
Continuously Variable Transmission (Cvt): Adjustments
Continuously Variable Transmission (Cvt): Overhaul
Continuously Variable Transmission (Cvt): Maintenance
DTC P0107: Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage; DTC P0108: Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
DTC P0335: Crankshaft Position (CKP) Sensor No Signal
DTC P0336: Range/Performance Problem in Crankshaft Position (CKP) Sensor Circuit
DTC P0501: Range/Performance Problem in CVT Speed Sensor Circuit
DTC P0502: Problem in CVT Speed Sensor Circuit
DTC P0705: Short in Transmission Range Switch Circuit (Multiple Shift-position Input)
DTC P0706: Open in Transmission Range Switch Circuit
DTC P0716: Range/Performance Problem in CVT Input Shaft (Drive Pulley) Speed Sensor Circuit; DTC P0717: Problem in CVT Input Shaft (Drive Pulley) Speed Sensor Circuit (No Signal Input)
DTC P0721: Range/Performance Problem in CVT Output Shaft (Driven Pulley) Speed Sensor Circuit; DTC P0722: Problem in CVT Output Shaft (Driven Pulley) Speed Sensor Circuit (No Signal Input)
DTC P0746: CVT Drive Pulley Pressure Control Valve Stuck OFF
DTC P0777: CVT Driven Pulley Pressure Control Valve Stuck ON
DTC P0796: CVT Start Clutch Pressure Control Valve Stuck OFF
DTC P0962: CVT Drive Pulley Pressure Control Valve Circuit Low Voltage
DTC P0963: CVT Drive Pulley Pressure Control Valve Circuit High Voltage
DTC P0966: CVT Driven Pulley Pressure Control Valve Circuit Low Voltage
DTC P0967: CVT Driven Pulley Pressure Control Valve Circuit High Voltage
DTC P0970: CVT Start Clutch Pressure Control Valve Circuit Low Voltage
DTC P0971: CVT Start Clutch Pressure Control Valve Circuit High Voltage
DTC P1860: Inhibitor Solenoid Circuit Low Voltage
DTC P1861: Inhibitor Solenoid Circuit High Voltage
DTC P1890: Problem in CVT Speed Control System
DTC P1891: Problem in Start Clutch Control System
DTC P1898/P0780: CVT Drive Pulley Pressure Control Valve Stuck ON or CVT Driven Pulley Pressure Control Valve Stuck OFF
DTC P1899/P0780: CVT Drive Pulley Pressure Control Valve Stuck OFF or CVT Driven Pulley Pressure Control Valve Stuck ON
DTC P2122: Accelerator Pedal Position (APP) Sensor A (Throttle Position (TP) Sensor D) Circuit Low Voltage Input; DTC P2123: Accelerator Pedal Position (APP) Sensor A (Throttle Position (TP) Sensor D) Circuit High Voltage Input
DTC U0029: F-CAN Malfunction (BUS-OFF); DTC U0121: F-CAN Malfunction (Powertrain Control Module (PCM)-ABS); DTC U0122: F-CAN Malfunction (Powertrain Control Module (PCM)-VSA); DTC U0155: F-CAN Malfunction (Powertrain Control Module (PCM)-Gauge Control Module); DTC U1205: IMA-CAN Malfunction (Powertrain Control Module (PCM)-Motor Control Module (MCM))
DTC U0029: F-CAN Malfunction (BUS-OFF); DTC U0122: F-CAN Malfunction (Powertrain Control Module (PCM)-VSA); DTC U0155: F-CAN Malfunction (Powertrain Control Module (PCM)-Gauge Control Module); DTC U1205: IMA-CAN Malfunction (Powertrain Control Module (PCM)-Motor Control Module (MCM))
DTC U0038: IMA-CAN Malfunction (BUS-OFF)
DTC U0038: IMA-CAN Malfunction (BUS-OFF) (2)
DTC U0301: PGM-FI System and A/T System Program Version Mismatch
DTC U0302: PCM-FI System and A/T System Program Version Mismatch

All sections

DTC U0301: PGM-FI System and A/T System Program Version Mismatch Honda Insight ZE2

Automatic Trans ~122 words

Note. Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review General Troubleshooting Information (see GENERAL TROUBLESHOOTING INFORMATION ). This DTC is indicated when a PCM update is not completed. Do not turn the ignition switch to ACC (I) or LOCK (0) while updating the PCM. If you do, the PCM can be damaged.

Do the PCM update procedure (A/T system) (see «PCM UPDATE»(ref-360284-S30758408212010042800000) ).
Check for Pending or Confirmed DTCs with the HDS. Is DTC U0301 indicated? YES -Replace the original PCM (see «PCM REPLACEMENT»(ref-360284-S39322714792010042800000) ). NO -Troubleshooting is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.