Engine Lubrication System (K24Z1 Engines)
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Engine oil | Capacity | Engine overhaul | 5.3 L (5.6 US qt) | |
| Oil change including filter | 4.2 L (4.4 US qt) | |||
| Oil change without filter | 4.0 L (4.2 US qt) | |||
| Oil pump | Inner rotor-to-outer rotor radial clearance | 0.06-0.16 mm (0.002-0.006 in) | 0.20 mm (0.008 in) | |
| Pump housing-to-outer rotor radial clearance | 0.15-0.21 mm (0.006-0.008 in) | 0.23 mm (0.009 in) | ||
| Pump housing-to-outer rotor axial clearance | 0.035-0.070 mm (0.0014-0.0028 in) | 0.12 mm (0.005 in) | ||
| Balancer shafts, journal diameter | No. 1 journal, front shaft | 19.938-19.950 mm (0.7850-0.7854 in) | 19.92 mm (0.784 in) | |
| No 1 journal, rear shaft | 23.938-23.950 mm (0.9424-0.9429 in) | 23.92 mm (0 942 in) | ||
| No. 2 journal, front shaft | 32 949-32.961 mm (1.2972-1.2977 in) | 32.93 mm (1.296 in) | ||
| No. 2 journal, rear shaft | 32.949-32.961 mm (1 2972-1.2977 in) | 32.93 mm (1.296 in) | ||
| Balancer shafts, journal taper | 0.005 mm (0.0002 in) max. | |||
| Balancer shafts, end play | Front | 0.053-0.098 mm (0.0021 -0.0038 in) | 0.14 mm (0.006 in) | |
| Rear | 0.053-0.098 mm (0.0021 -0.0038 in) | 0.14 mm (0 006 in) | ||
| Balancer shafts, shaft-to-bearing clearance | No. 1 journal, front shaft | 0.050-0.082 mm (0.0020-0.0032 in) | 0.10 mm (0 004 in) | |
| No 1 journal, rear shaft | 0.050-0.082 mm (0.0020-0.0032 in) | 0.10 mm (0 004 in) | ||
| No. 2 journal, front shaft | 0.060-0.120 mm (0.0024-0.0047 in) | 0.15 mm (0.006 in) | ||
| No. 2 journal, rear shaft | 0.060-0.120 mm (0.0024-0.0047 in) | 0 15 mm (0.006 in) | ||
| Balancer shaft bearings, I.D. | No. 1 journal, front shaft | 20.000-20.020 mm (0.7874-0.7882 in) | 20.03 mm (0.789 in) | |
| No. 1 journal, rear shaft | 24.000-24.020 mm (0.9449-0.9457 in) | 24.03 mm (0.946 in) | ||
| No. 2 journal, front shaft | 33.021 -33.069 mm (1.3000-1.3019 in) | 33.09 mm (1.303 in) | ||
| No. 2 journal, rear shaft | 33.021-33.069 mm (1.3000-1.3019 in) | 33.09 mm (1.303 in) | ||
| Oil pressure with oil temperature at 176°F(80°C) | At idle | 69 kPa (0.7 kgf/cm 2 , 10.0 psi) min. | ||
| At 3, 000 rpm | 304 kPa (3.1 kgf/cm 2 , 44 psi) min. |
ENGINE LUBRICATION CHART
Engine Lubrication System (K24Z6 Engines)
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Engine oil | Capacity | Engine overhaul | 5.3 L (5.6 US qt) | |
| Oil change including filter | 4.2 L (4.4 US qt) | |||
| Oil change without filter | 4.0 L (4.2 US qt) | |||
| Oil pump | Inner rotor-to-outer rotor radial clearance | 0.05-0.15 mm (0.002-0.006 in) | 0.19 mm (0.007 in) | |
| Pump housing-to-outer rotor radial clearance | 0.15-0 21 mm (0.006-0.008 in) | 0 23 mm (0.009 in) | ||
| Pump housing-to-outer rotor axial clearance | 0.035-0.070 mm (0.0014-0.0028 in) | 0.12 mm (0 005 in) | ||
| Balancer shafts, journal diameter | No. 1 journal, front shaft | 19.938-19.950 mm (0.7850-0.7854 in) | 19.92 mm (0.784 in) | |
| No. 1 journal, rear shaft | 23.938-23.950 mm (0.9424-0.9429 in) | 23.92 mm (0.942 in) | ||
| No. 2 journal, front shaft | 32.949-32.961 mm (1.2972-1 2977 in) | 32.93 mm (1.296 in) | ||
| No. 2 journal, rear shaft | 32.949-32.961 mm (1.2972-1.2977 in) | 32.93 mm (1.296 in) | ||
| Balancer shafts, journal taper | 0.005 mm (0.0002 in) max. | |||
| Balancer shafts, end play | Front | 0.063-0.108 mm (0.0025-0.0043 in) | 0 14 mm (0.006 in) | |
| Rear | 0.063-0.108 mm (0.0025-0.0043 in) | 0.14 mm (0 006 in) | ||
| Balancer shafts, shaft-to-bearing clearance | No. 1 journal, front shaft | 0.050-0.082 mm (0.0020-0.0032 in) | 0.10 mm (0 004 in) | |
| No. 1 journal, rear shaft | 0.050-0.082 mm (0.0020-0.0032 in) | 0.10 mm (0.004 in) | ||
| No 2 journal, front shaft | 0.060-0.120 mm (0 0024-0.0047 in) | 0.15 mm (0.006 in) | ||
| No. 2 journal, rear shaft | 0.060-0.120 mm (0 0024-0.0047 in) | 0.15 mm (0.006 in) | ||
| Balancer shaft bearings, I.D. | No. 1 journal, front shaft | 20.000-20.020 mm (0.7874-0.7882 in) | 20.03 mm (0.789 in) | |
| No. 1 journal, rear shaft | 24.000-24.020 mm (0.9449-0 9457 in) | 24.03 mm (0.946 in) | ||
| No. 2 journal, front shaft | 33.021-33.069 mm (1.3000-1.3019 in) | 33 09 mm (1.303 in) | ||
| No. 2 journal, rear shaft | 33.021-33.069 mm (1.3000-1.3019 in) | 33 09 mm (1.303 in) | ||
| Oil pressure with oil temperature at 176°F(80°C) | At idle | 69 kPa (0.7 kgf/cm 2 , 10.0 psi) mm. | ||
| At 3, 000 rpm | 304 kPa (3.1 kgf/cm 2 , 44 psi) min. |
ENGINE LUBRICATION CHART