FLUID CAPACITIES
The following refill capacities given are approximate. Correct fluid level should always be determined by marks on dipstick, rather than amount of fluid added. DO NOT overfill. See TRANSMISSION FLUID CAPACITIES table.
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|---|---|
| 4L60-E | 5.0 (4.7) | 11.0 (10.6) |
TRANSMISSION FLUID CAPACITIES
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Auxiliary Oil Cooler Line | 17 (23) |
| Flair Nuts | 33 (45) |
| Forward Servo Cover Bolt | 18 (24) |
| Heat Shield Retaining Bolts | 13 (18) |
| Oil Pan Drain Plug | 13 (18) |
| Park Neutral Position Switch Bolt | 18 (24) |
| Reverse Servo Cover Bolt | 18 (24) |
| Transmission Control Lever Nut | 18 (24) |
| Upper Cooler Line-To-Radiator Flair Nut | 33 (45) |
| INCH Lbs. (N.m) | |
| Accumulator-To-Case Bolt | 97 (11) |
| Auxiliary Oil Cooler Support Bolts | 89 (10) |
| Control Valve Body Bolts | 97 (11) |
| Filler Tube Bolt | 53 (6) |
| Fluid Pressure Switch | 97 (11) |
| Manual Detent Spring Bolt | 97 (11) |
| Manual Valve Position Switch Bolts | 97 (11) |
| Oil Pan Bolt | 97 (11) |
| Oil Pass Cover Bolt | 97 (11) |
| Pressure Control Solenoid Bolt | 97 (11) |
| Spacer Plate Support Retaining Bolt | 97 (11) |
| TCC Solenoid Bolt | 97 (11) |
| Transmission Fluid Indicator Stop Bolt | 97 (11) |
| Valve Body-To-Case Bolt (1) | 97 (11) |
| VSS Bolt | 97 (11) |
| (1) Tighten valve body bolts in a spiral pattern starting in center of valve body. | |
| (1) | Tighten valve body bolts in a spiral pattern starting in center of valve body. |
TORQUE SPECIFICATIONS