Home ReviewsRefund
Home/GMC/Envoy/GMC Envoy I (1997-2000)/Repair manual/Testing & Diagnostics/DTC P0341 - CAMSHAFT POSITION SENSOR CIRCUIT
Contents Wiring diagrams Section: Testing & Diagnostics All sections

DTC P0341 - CAMSHAFT POSITION SENSOR CIRCUIT GMC Envoy I

Testing & Diagnostics

Note. For circuit reference, see WIRING DIAGRAMS - 4.3L article.

Circuit Description

DTC P0341 will set if cam pulses are not in proper ratio to crank pulses.

Conditions for setting DTC

  1. Engine running.
  2. Cam sensor reference pulse is not detected at correct interval.

More articles — Engine Controls - Tests W/codes - 4.3L