DOOR WINDOW HEIGHT STOP ADJUSTMENT
- Remove front door trim panel and front door inside panel sound insulator. Lower door window 3.00" (76.2 mm) from full up position. Loosen nut and washer assemblies securing window regulator equalizer arm bracket to front door inner panel.
- With front door open, place hands on each side of glass and pull glass fully rearward into door glass top runner. Tighten nut and washer assembly securing the front of the window regulator equalizer arm bracket.
- Apply downward pressure on window regulator equalizer arm bracket. If the hole is a vertical slotted hole, ensure the nut and washer securing the rear of the window regulator equalizer arm bracket is positioned at the bottom of the slot as you apply downward pressure. Tighten remaining nut and washer assemblies to 62-89 INCH lbs. (7-10 N.m). Open and close window to verify proper operation.