Manual sections

Repair manual

Module Communications Network Ford Transit Connect I facelift

Step-by-step instructions on "Module Communications Network" for Ford Transit Connect I facelift (2009–2013). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

General information

Network Termination And Gateway Function

Communication Network Impedance

Special Tool(s)

Principles of Operation

Controller Area Network (CAN) Fault Tolerance

Controller Area Network (CAN) Multiplex Messages

CAN Module Communication Message Chart

Inspection and Verification

DTC Charts

Communication Network DTC Chart

Symptom Chart

Pinpoint Test A: The PCM Does Not Respond To The Scan Tool

Normal Operation

Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool

Pinpoint Test C: The Instrument Cluster (IC) Does Not Respond To The Scan Tool

PINPOINT TEST C: THE IC DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test D: The Parking Aid Module (PAM) Does Not Respond To The Scan Tool Or No ISO Communication

PINPOINT TEST D: THE PAM DOES NOT RESPOND TO THE SCAN TOOL OR NO ISO NETWORK COMMUNICATION

Pinpoint Test E: The Audio Control Module (ACM) Does Not Respond To The Scan Tool

PINPOINT TEST E: THE ACM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test F: The Speech Recognition Module (SRM) Does Not Respond To The Scan Tool

PINPOINT TEST F: THE SRM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test G: The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool

PINPOINT TEST G: THE OCSM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test H: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool

PINPOINT TEST H: THE RCM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test I: The Tire Pressure Monitoring System (TPMS) Module Does Not Respond To The Scan Tool

PINPOINT TEST I: THE TPMS MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test J: The Generic Electronic Module (GEM) Does Not Respond To The Scan Tool

PINPOINT TEST J: THE GEM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test K: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST K: NO MS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST L: INTERMITTENT NO MS-CAN COMMUNICATION, ONE OR MORE MODULES ARE NOT RESPONDING DURING NETWORK TEST

Pinpoint Test M: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST M: NO HS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

Pinpoint Test N: Intermittent No High Speed Controller Area Network (HS-CAN) Communication, One Or More Modules Are Not Responding During Network Test

PINPOINT TEST N: INTERMITTENT NO HS-CAN COMMUNICATION, ONE OR MORE MODULES ARE NOT RESPONDING DURING NETWORK TEST

Pinpoint Test O: No Power To The Scan Tool