SUSPENSION SYSTEM ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/Split |
|---|---|---|---|
| Front | |||
| Camber | 0.5° +/- 0.6° | 0.5° +/- 0.6° | 0° +/- 0.7° |
| Caster | 3.8° +/- 1.0° | 3.8° +/- 1.0° | 0° +/- 0.85° |
| Toe (positive value is toe-in, negative value is toe-out) | 0.20° +/- 0.25° | ||
| Rear (Four Door) | |||
| Camber | 1.0° +/- 0.7° | 1.0° +/- 0.7° | 0° +/- 1.2° |
| Caster | |||
| Toe (positive value is toe-in, negative value is toe-out) | 0.18° +/- 0.20° | 0.18° +/- 0.20° | 0.36° +/- 0.25° |
| Rear (Wagon) | |||
| Camber | 0.6° +/- 0.7° | 0.6° +/- 0.7° | 0° +/- 1.2° |
| Caster | |||
| Toe (positive value is toe-in, negative value is toe-out) | 0.18° +/- 0.20° | 0.18° +/- 0.20° | 0.36° +/- 0.25° |
SUSPENSION SYSTEM ALIGNMENT SPECIFICATIONS
SUSPENSION SYSTEM GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Front Ride Height | |
| 4-Door | 713.3 mm +/- 10 mm (28.08 in +/- 0.19 in) |
| Wagon | 710.4 mm +/- 10 mm (27.96 in +/- 0.19 in) |
| Rear Ride Height | |
| 4-Door | 696.3 mm +/- 10 mm (27.41 in +/- 0.19 in) |
| Wagon | 702.8 mm +/- 10 mm (27.66 in +/- 0.19 in) |
| Ball Joint Deflection | |
| Lower | 0--0.8 mm (0--0.032 in) |
SUSPENSION SYSTEM GENERAL SPECIFICATIONS
SUSPENSION SYSTEM TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Front subframe mounting bolts | 103 |
| Tie-rod jam nuts | 55 |
| Upper strut mounting nuts | 35 |
| Rear control arm in board mounting nut (4-door) | 80 |
| Rear control arm to spindle nut (station wagon) | 80 |
SUSPENSION SYSTEM TORQUE SPECIFICATIONS