Home/Ford/Ranger/Ford Ranger I (1998-2006)/Repair manual/Transfer Case/Transfer Case - Automatic Shift: Specifications
Contents Wiring diagrams Section: Transfer Case All sections

Transfer Case - Automatic Shift: Specifications Ford Ranger I

SPECIFICATIONS

ItemSpecification
Sealant
Threadlock and Sealer E0AZ-19554-AAWSK-M2G351-A5
Ultra Silicone Sealant F7TZ-19554-AADana 5-17
Lubricant
MERCON® Multi-Purpose (ATF) Transmission Fluid XT-2-QDXMERCON®
Capacity
Transfer Case L (Pint)1.2 (2.5)

General Specifications

DescriptionNm
Nut retaining the flange to the rear output shaft355
Bolt retaining the rear driveshaft to the flange111
Bolt retaining the motor assembly and connector to the transfer case cover10
Bolt retaining the skid plate to the frame24
Bolt retaining the damper to the transfer case40
Drain plug24
Bolt retaining the driveshaft CV joint to the front output shaft assembly30
Bolt retaining the transfer case to the extension housing54
Bolt retaining the front adapter to the transfer case34
Bolt retaining the transfer case to the transfer case cover34
Bolt retaining the transfer case cover to the transfer case34
Fill plug24

TORQUE SPECIFICATIONS