Diagnostic Overview
Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.
Refer to SYSTEM WIRING DIAGRAMS for additional information.
Normal Operation and Fault Conditions
The BSIA system is controlled by the SJB and is activated when the SJB receives a brake pedal applied input.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B2572 | BSIA Output Circuit Failure | If an open, short to ground or short to power is detected on the BSIA output circuit. |
DTC FAULT TRIGGER CONDITIONS
Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.
Refer to SYSTEM WIRING DIAGRAMS for additional information.
The SelectShift™ switch is a toggle switch integral to the selector lever knob. When the selector lever is placed in the sport mode position, the upshift/downshift feature becomes activated. If a new switch is required install a new selector lever knob.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0815 | Upshift Switch Circuit | Sets when a open or short circuit to the upshift switch occurs. |
| P0816 | Downshift Switch Circuit | Sets when a open or short circuit to the downshift switch occurs. |
DTC FAULT TRIGGER CONDITIONS