Home/Ford/Kuga/Ford Kuga II (2012-2016)/Repair manual/Steering Column Switches/Steering Wheel & Steering Column Electrical Components: Rem…
Contents Wiring diagrams Section: Steering Column Switches All sections

Steering Wheel & Steering Column Electrical Components: Removal & Installation Ford Kuga II

Steering Column Switches 2 illustrations ~239 words

Removal

  1. Refer to: «STEERING COLUMN SHROUDS»(ref-658897-S16368426722014092900000) .

Installation

  1. To install, reverse the removal procedure.

Scheme 2

Scheme 2: Removal
  1. Refer to: «INSTRUMENT PANEL CENTER FINISH PANEL»(ref-658886-S37837483202014092900000) .
  1. To install, reverse the removal procedure.
  1. Refer to: «STEERING COLUMN SHROUDS»(ref-658897-S16368426722014092900000) .
  2. NOTE: Make sure that the component terminals are not bent or damaged.
  1. To install, reverse the removal procedure.
  1. Refer to: «STEERING COLUMN SHROUDS»(ref-658897-S16368426722014092900000) .
  2. NOTE: Make sure that the component terminals are not bent or damaged.
  1. To install, reverse the removal procedure.

All vehicles

Pinpoint Test F

F1 Upper steering wheel switches
  1. Upper steering wheel switches
F2 Lower steering wheel switches
  1. click to open the image
  2. Lower steering wheel switches
  1. To install, reverse the removal procedure.

Scheme 3

Scheme 3: Removal
  1. Refer to: «PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER»(ref-658898-S22939728652014092900000) . Refer to: «PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER»(ref-658895-S23145881932014092900000) .
  2. Torque : 12 lb.in (1.4 Nm)
  3. NOTE: This step is only necessary when installing a new component. Refer to: «IGNITION SWITCH»(ref-658876-S11783108932014092900000) .
  4. NOTE: This step is only necessary when installing a new component. Refer to: «IGNITION LOCK CYLINDER»(ref-658832-S08468467982014092900000) .
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

  1. Refer to: «CLOCKSPRING»(ref-658836-S41179115142014092900000) .
  2. Torque : 25 lb.in (2.8 Nm)
  3. Torque : 12 lb.in (1.4 Nm)
  1. To install, reverse the removal procedure.