Home ReviewsRefund
Home/Ford/Kuga/Ford Kuga II (2012-2016)/Repair manual/Automatic Trans/Automatic Transaxle External Controls: Removal & Installati…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transaxle External Controls: Removal & Installation Ford Kuga II

Automatic Trans 4 illustrations ~293 words

Removal

  1. Refer to: «FLOOR CONSOLE»(ref-658886-S00664678202014092900000) .
  2. Torque : 80 lb.in (9 Nm)

Installation

  1. To install, reverse the removal procedure.
  2. Adjust the selector lever cable when a new selector lever is installed. Refer to: «SELECTOR LEVER CABLE ADJUSTMENT - 6-SPEED AUTOMATIC TRANSMISSION - 6F35»(ref-658859-S38113774412014092900000) .

Scheme 4

Scheme 4: Removal
Scheme 4: Removal

Scheme 5

Scheme 5
Scheme 5

Scheme 6

Scheme 6
Scheme 6

Scheme 7

Scheme 7
Scheme 7
  1. To install, reverse the removal procedure.

Pinpoint Test C

C6 vehicles
  1. click to open the image
  2. vehicles
C9 vehicles
  1. click to open the image
  2. vehicles
C13 All vehicles
  1. click to open the image
  2. All vehicles

Pinpoint Test C

C6 vehicles
  1. click to open the image
  2. vehicles
C8 vehicles
  1. click to open the image
  2. vehicles
C9 All vehicles
  1. click to open the image
  2. All vehicles
C17 vehicles
  1. click to open the image
  2. vehicles
C18 vehicles
  1. vehicles
C19 All vehicles
  1. Refer to: «AIR CLEANER»(ref-658889-S29103318952014092900000) (2.0).
  2. Refer to: «AIR CLEANER»(ref-658908-S40071574252014092900000) (2.5).
  3. All vehicles
C20 P

Note. The SelectShift™ switch is part of the selector lever knob. To install a new SelectShift™ switch a new selector lever knob must be installed.

  1. To install, reverse the removal procedure.

More articles — Automatic Transaxle External Controls