Home/Ford/Fusion/Ford Fusion I facelift (2005-2012)/Repair manual/Automatic Trans/Transaxle/transmission Cooling: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Transaxle/transmission Cooling: Specifications Ford Fusion I facelift

GENERAL SPECIFICATIONS

ItemSpecification
Fluid
MERCON® V, MERCON® SP, Motorcraft Premium Automatic Transmission Fluid, Motorcraft Continuously Variable Chain Type Transmission Fluid and FNR5 Automatic Transmission Fluid are not interchangeable transmission fluids. The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the material specification for the correct fluid. The transmission fluid should be changed every 96,560 km (60,000 mi) regardless of normal or special operating conditions.
NOTICE: The transmission fluid used for the FNR5 and the 6-speed transaxles are unique. Do not use water-based cleaners to clean or flush the transmission fluid cooler tubes or transmission damage will occur. Mineral spirits can be used to clean the transmission fluid cooler tubes, providing the transmission fluid cooler tubes are flushed with clean automatic transmission fluid and blown dry with shop air. Use only clean automatic transmission fluid designated for this transaxle and torque converter being serviced.

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Transmission fluid cooler tubes10
Transmission fluid cooler tubes (at the radiator)30
Transmission fluid fill plug (6-speed)39

TORQUE SPECIFICATIONS

See also:
JACKING AND LIFTING