REMOVAL AND INSTALLATION
- Remove the floor console. For additional information, refer to «INSTRUMENT PANEL AND CONSOLE»(ref-278275) article.
- Remove the 2 screws and the ambient lighting module. Disconnect the electrical connector.
- To install, reverse the removal procedure.
Scheme 29
| Item | Part Number | Description |
|---|---|---|
| 1 | 044D90 | Floor console trim panel |
| 2 | Seat heater switch electrical connectors (part of 14014) | |
| 3 | Ambient lighting switch electrical connector (part of 14D375) | |
| 4 | Ambient lighting switch |
- Remove the floor console trim panel. Disconnect the electrical connectors.
- Squeeze the retaining tabs and remove the ambient lighting switch.
- To install, reverse the removal procedure.