Speed Control Deactivator Switch Adjustment
- Remove the speed control deactivator switch by turning the switch counterclockwise.
- Pull out the speed control deactivator switch plunger until it is fully extended. Measure the plunger length. It should measure 24 mm (0.94 in).
- Apply the brake pedal.
- Install the speed control deactivator switch by turning the switch clockwise.
- Slowly release the brake pedal.
Scheme 4
Scheme 4: Speed Control Actuator
| Item | Part Number | Description |
|---|
| 1 | | Speed control actuator bolts (3 required) |
| 2 | 9C735 | Speed control actuator |
| 3 | | Speed control actuator electrical connector (part of 14K733) |
| 4 | 9A820 | Speed control cable |
