Audio System
Refer to RADIO for schematic and connector information.
Scheme 38
CD Error Codes Vehicles With 6006 Or 9006 Audio Unit
| Error Code | Error Description | Error Rectification |
|---|---|---|
| E1 | Communications Error | INSTALL a new audio unit. TEST the system for normal operation. |
| E2 | Overtemp Error | The audio unit is too hot. Unit will not work until it has cooled down. CHECK that the heater duct(s) are not blowing hot air onto the audio unit. If the concern persists, INSTALL a new audio unit. TEST the system for normal operation. |
| E3 | Mechanical Error | INSTALL a new audio unit. TEST the system for normal operation. |
| E4 | Focus Error | CD is upside down or dirty. CLEAN the CD and try it again. If the error code is still displayed, INSERT a different CD. If the error code is still displayed, INSTALL a new audio unit. TEST the system for normal operation. |
| E5 | Overcurrent Error | INSTALL a new audio unit. TEST the system for normal operation. |
ERROR CODES CHART
Pinpoint Tests
Note. Use a digital multimeter for all electrical measurements.